Abstract:Acidic gases such as H 2 S and CO 2 are generated in the refineries during coal gasification. These pollutant gases need to be treated before releasing to the atmosphere. Conventionally, H 2 S gas is treated by Claus process in which H 2 S is converted to elemental S and H 2 O, in presence of O 2 at ∼1,200 K. In the present energy scenarios, hydrogen has got importance as a source of clean fuel for industrial application. The H 2 S generated in the refineries can be a potential precursor of hydrogen. If this hydrogen can be obtained by thermal decomposition of H 2 S, that can increase the overall economic value of the H 2 S containing streams and the produced hydrogen can be used for hydrocracking and hydro-treating in refineries, as well as to synthesize value-added products for chemical industries. However, H 2 S thermal decomposition is an endothermic and equilibrium limited reaction (equilibrium conversion is only ∼15 % at 1,000 K), requiring a very high temperature (∼1,500 K) to achieve even a conversion of greater than 40 %. Packed Bed Catalytic Membrane Reactor (PBCMR) for thermal decomposition of H 2 S can be a potential technology augmentation and process intensification to increase this equilibrium conversion. In this work, modeling and experimental studies of H 2 S thermal decomposition using in-house designed & developed PBCMR have been carried out. The modeling studies were validated with experimental data. Clay-alumina ceramic tubular membrane (L: 250 mm; OD: 12 mm; thickness: 2 mm) was fabricated using extrusion process having an average membrane pore size of ∼1 μm and with a porosity of ∼20 %. Pt (2 %) coated alumina extrudes were used as catalyst to accelerate the reaction kinetics. Experimental studies showed that H 2 S to hydrogen conversion of ∼90 % is achieved using PBCMR at ∼1,523 K, compared to only ∼40 % conversion in a conventional packed bed tubular reactor (without membrane). Modelling studies were carried out to study the influence of operating parameters such as, reactor wall temperature, feed temperature, pressure and feed velocity. Studies showed that reactor wall temperature is having the most dominant effect on H 2 S conversion, which is confirmed by experimental findings. The studies offer useful insights into the application of PBCMR technology for management of waste gas stream containing H 2 S and recovery of hydrogen.

H2 production with low carbon content via MSR in packed bed membrane reactors for high-temperature polymeric electrolyte membrane fuel cell

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Modelling of a high-temperature polymer electrolyte membrane fuel cell integrated with a methanol steam reformer cell

Efficient Low-temperature Hydrogen Production by Electrochemical-assisted Methanol Steam Reforming

Membrane reactors for methane steam reforming (MSR)

Membrane reformer technology for sustainable hydrogen production from hydrocarbon feedstocks

Parametric and sensitive analysis of Pd-Ag membrane reactor performance in biogas reforming to generate decarbonized hydrogen by Computational Fluid Dynamic-Response Surface Methodology

A flow-through catalytic membrane micro-reactor for hydrogen production by methanol steam reforming

Configuration of coupling methanol steam reforming over Cu-based catalyst in a synthetic palladium membrane for one-step high purity hydrogen production

Optimization of Small-Scale Hydrogen Production with Membrane Reactors

Modeling of Packed Bed Methanol Steam Reformer Integrated with Tubular High Temperature Proton Exchange Membrane Fuel Cell

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Modeling & experimental studies on enhancement of H 2 S conversion using catalytic membrane reactor for hydrogen production

Hydrogen Produced from Simulated Biogas Using a Membrane Reactor with a Dimethoxydimethylsilane-Derived Silica Membrane Operated under Pressure and Without Sweep Gas

Pd-Ag-Au-Ni Membrane Reactor For Methoxymethane Steam Reforming