Abstract:Methanol steam reforming coupled with an efficient hydrogen purification technology to produce high purity hydrogen that feeds for hydrogen fuel cells is an attractive approach to realizing distributed power generation. However, the harmony of catalytic reforming and hydrogen separation with respect to thermodynamics is still an issue. In this work, in order to construct an integrated methanol steam reforming (MSR) reactor for high purity hydrogen production, CuCe/Al2O3 was synthesized by a hydrothermal-impregnated method and a Pd membrane supported by a porous ceramic using the electroless plating method. The results revealed that the catalytic activity and high temperature stability for methanol steam reforming were evidently improved by tuning the copper dispersion, porous structure and the crystal phase. The coupling range with palladium membrane operating temperature was widened. CuCe/Al2O3 presented an excellent stability with a better carbon deposition resistance for the long-term tests than Cu/Al2O3, which exhibited 836.68 μmol/gcat. min of H2 production with low carbon deposition (3.38 wt%) and lower CO emission (0.48 vol%). A 10 μm thick Pd membrane that was deposited on the ceramic support displayed dense and even surface morphology. The effect of palladium membrane structure on hydrogen separation was analyzed. In addition, the influence of temperature on coupling was discussed. Ultimately, high purity of H2 (99.36 vol%) was achieved at 400 °C by integrating the Pd membrane reactor with methanol steam reforming. The internal temperature distribution of the reactor and the effects of feeding conditions were also investigated. This work might offer certain reference for the development of the future distributed integrated hydrogen power generation system, especially in the application of electric vehicles and on-site electricity.

A flow-through catalytic membrane micro-reactor for hydrogen production by methanol steam reforming

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Configuration of coupling methanol steam reforming over Cu-based catalyst in a synthetic palladium membrane for one-step high purity hydrogen production

Catalytic membrane nano reactor with Cu/ZnO in situ immobilized in membrane pores for methanol dehydrogenation to formaldehyde

Steam reforming of methanol for hydrogen production over attapulgite-based zeolite-supported Cu-Zr catalyst

Membrane reactors for methane steam reforming (MSR)

Efficient Low-temperature Hydrogen Production by Electrochemical-assisted Methanol Steam Reforming

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

CuO–ZnO catalyst decorated on porous CeO2-based nanosheets in-situ grown on cordierite for methanol steam reforming

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

The Cu-Al2O3 Interface: an Unignorable Active Site for Methanol Steam Reforming Hydrogen Production

Low-temperature Cu/Zn/SBA-16 integrating carbon membrane reactor for hydrogen production and high CO conversion through water-gas shift reaction

Hydrogen Production from Cylindrical Methanol Steam Reforming Microreactor with Porous Cu-Al Fiber Sintered Felt