Abstract:Hydrogen is considered to be an efficient, clean and environmental, viable energy carrier in the 21st century [1]. Generally, there are many ways to produce hydrogen from both fossil fuels and renewable energy such as solar, wind, geothermal energy and so on [2,3]. Yet it is a realistic and practicable method for hydrogen production through hydrocarbon fuel reforming in the near future [7]. In the three types of fuel reforming technologies, namely steam, partial oxidation, auto-thermal reforming, steam reforming has the advantages of low reaction temperature, low CO content and high H2 content in the products and that is very favorable for mobile applications such as Proton Exchange Membrane Fuel Cell (PEMFC) [4,5]. However, steam reforming (SR) of hydrocarbon fuels is usually strongly endothermic reaction, the process of SR is often limited by heat and mass transfer in the reactors, so it presents a slow reaction kinetics which is characterized by low dynamic response and cold spot in the reactor catalyst bed [6]. Therefore, study of process intensification and optimization of SR for hydrogen production becomes important for the improvement of the reactor performance by enhancing heat and mass transfer and this can be divided to three classes. One way is to adopt new catalyst materials and additives such as coating catalyst, nanometer particle catalyst and so on to enhance the catalytic reforming reaction process [7]; another way is to reduce size scale of reaction channels in steam reforming reactors, for example, using micro-reactors instead of conventional reactors, which can reduce the heat and mass transport resistance by decreasing the transport distance [8]; in addition, microwave direct heating and membrane separation technology are also used to intensify the strongly endothermic SR process [9]. In this chapter, it is studied and stated that methanol and methane are taken as model hydrocarbon fuels for hydrogen production by steam reforming technology and effective process intensification methods of micro-reactor and coating catalyst. The innovative stainless steel micro-reactors which can be used to adopt both kernel catalyst and coating catalyst was designed and fabricated. A novel catalytic coating fabrication method of cold spray technology was also proposed. Experiments and simulation studies were carried out on methanol steam reforming (MSR) and steam methane reforming (SRM) in the microreactor on kernel and coating catalyst respectively.

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Development of Large-Flux Laminated Methanol Reforming Microreactor Heated by Methanol Catalytic Combustion

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

Microchannel Structure Design for Hydrogen Supply from Methanol Steam Reforming

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Thermal Analysis of a Micro Tubular Reactor for Methanol Steam Reforming by Optimizing the Multilayer Arrangement of Catalyst Bed for the Catalytic Combustion of Methanolr

Methanol Steam Reforming for Hydrogen Production in a Minireactor

A flow-through catalytic membrane micro-reactor for hydrogen production by methanol steam reforming

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Numerical Simulation of Methanol Steam Reforming Based on Cu/ZnO/Al2 O3 Via Micro-Channel Reactor for Hydrogen Production

Numerical Simulation Of Steam Reforming Of Methanol In Microchannel Reactor

Structural Design of Self-Thermal Methanol Steam Reforming Microreactor with Porous Combustion Reaction Support for Hydrogen Production

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Process Intensification of Steam Reforming for Hydrogen Production