Abstract:In the chemical industry, hydrogen (H2) production through steam-methane reforming is a well-established process. With the growing demand for H-fueled vehicles and charging stations, there is a need for compact reformers with efficient heat transfer capabilities. In this study, computational fluid dynamics simulations were performed to evaluate the methane (CH4) conversion and heat transfer efficiency of various reformer designs. These designs include single, double, and triple tubes, each with parallel- and counter-flow configurations between the reformate feed and heat source. The findings revealed substantial disparities in methane conversion between the tube designs and flow configurations. Notably, the triple-tube design outperforms single and double tubes, exhibiting higher methane conversion and improved heat transfer efficiency. This superior performance is attributed to the larger wall area facing the heat source and additional heat recovery from the reformate flowing in the inner annulus. This led to the highest temperature at the catalyst exit among the cases, increasing methane conversion, and the lowest reformate temperature at the reformer tube exit, which is also beneficial for the subsequent water–gas shift reaction process. Installing external fins on the reformer tube provided a more effective enhancement of heat transfer than using internal fins in the catalyst section. Regardless of the tube design employed, the counter-flow configuration consistently enhanced the heat transfer efficiency, resulting in 4.6–11.9% higher methane conversion than the parallel-flow configuration. Consequently, the triple-tube design with the counter-flow configuration achieved the highest methane conversion, offering flexibility in the reformer design, including the potential for lower heat input and a reduced catalyst volume.

Structural optimization calculation of methanol spiral tube reformer based on waste heat utilization and experimental verification of reactor performance

Design and performance optimization of diesel engine waste heat recovery methanol reforming hydrogen generation system

Study on the Impact of Methanol Steam Reforming Reactor Channel Structure on Hydrogen Production Performance

Development of Multilevel Amplified Methanol Steam Reforming Microreactor with High Hydrogen Production Rate

Design and optimization of spiral heated tubular dimethyl ether (DME) steam reforming reactor

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Performance Study on Methanol Steam Reforming Rib Micro-Reactor with Waste Heat Recovery

Numerical Modeling of Microchannel Reactors with Gradient Porous Surfaces for Hydrogen Production Based on Fractal Geometry

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Optimization design and performance analysis of methanol reforming reactor for exhaust waste heat recovery of marine engine

Structural optimization of 3D printed SiC scaffold with gradient pore size distribution as catalyst support for methanol steam reforming

Numerical investigation of a multichannel reactor for syngas production by methanol steam reforming at various operating conditions

Experimental Study of the Design and Performance Optimisation of a Self-Heating Methanol On-Board Reforming Reactor for Hydrogen Production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A novel thermally autonomous methanol steam reforming microreactor using SiC honeycomb ceramic as catalyst support for hydrogen production

Numerical Evaluation of Heat Transfer and Conversion Efficiency by Tube Design and Flow Configuration for a Compact Steam-Methane Reformer

Enhancement of methanol steam reforming in a tubular fixed-bed reactor with simultaneous heating inside and outside

Study on the Laws of Methanol Reforming Coupled with Flow, Heat and Mass Transfer Processes with Variable Catalyst Distribution in Microchannels

Simulation and Analysis of the Operating Conditions of Methanol Synthesis Converter

Two-Dimensional Modeling of A Plant-Scale Fixed-Bed Reactor for Hydrogen Production from Methanol Steam Reforming

Analysis and enhancement of methanol reformer performance for online reforming based on waste heat recovery of methanol-diesel dual direct injection engine