Abstract:Methanol is a prospective hydrogen storage medium that holds the potential to address the challenges of hydrogen storage and transportation. However, hydrogen production via methanol steam reforming faces several key obstacles, including high reaction temperature (e.g., 250–300 °C) and low methanol conversion (at <200 °C), while the purification procedure of hydrogen is commonly required to obtain high-purity H2. A novel method of H2 absorption-enhanced steam reforming of methanol is proposed to overcome the challenges mentioned above. The method involves the absorption and separation of H2 using an absorbent to facilitate the forward shift of the reaction equilibrium and enhance reaction performance. A thermodynamic analysis using the equilibrium constant method presents that the separation of H2 can improve the methanol conversion rate and the total H2 yield. The feasibility of the method is validated through experiments in a fixed-bed reactor (4 mm diameter, 194 mm length) under the conditions of 200 °C and 1 bar. In the experiments, 1 g of bulk catalyst (CuO/ZnO/Al2O3) and 150 g of bulk hydrogen absorbent (Aluminum-doped lanthanum penta-nickel alloy, LaNi4.3Al0.7 alloy) are sequentially loaded into the reactor. As a proof of concept, a CO2 concentration of 84.10% is obtained in the reaction step of the first cycle, and a gas stream with an H2 concentration of 81.66% is obtained in the corresponding regeneration step. A plug flow reactor model considering the kinetics is developed to analyze the effects of the number of cycles and H2 separation ratio on the enhancement performance. The method indicates a high potential for commercialization given its low reaction temperature, high-purity H2, and membrane-free design.

Hydrogen-rich gas with low-level CO produced with autothermal methanol reforming providing a real-time supply used to drive a kW-scale PEMFC system

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Development of Highly Efficient Methanol Steam Reforming System for Hydrogen Production and Supply for a Low Temperature Proton Exchange Membrane Fuel Cell

Development of Integrated Thermally Autonomous Reformed Methanol-Proton Exchange Membrane Fuel Cell System

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

A High-Yield and Ultra-Low-temperature Methanol Reformer Integratable with Phosphoric Acid Fuel Cell (PAFC)

Investigation of a methanol processing system comprising of a steam reformer and two preferential oxidation reactors for fuel cells

Operation Conditions Optimization of Hydrogen Production by Propane Autothermal Reforming for PEMFC Application

Design and operation optimization of an on-site hydrogen production and purification integration system for PEMFC

Development of Methanol Steam Reforming Microreactor Based on Stacked Wave Sheets and Copper Foam for Hydrogen Production

Investigation of methanol steam reforming reformer heated by catalyst combustion for kW-scale fuel cell

A hybrid fuel cell system integrated with methanol steam reformer and methanation reactor

Carbone-neutral oriented methanol-reforming HT-PEMFC cogeneration based on absorption power refrigeration cycle

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

A Micro-Reactor with Micro-Pin-fin Arrays for Hydrogen Production Via Methanol Steam Reforming

Coupling of a Small Scale Hydrogen Generator and a PEM Fuel Cell

Absorption-Enhanced Methanol Steam Reforming for Low-Temperature Hydrogen Production with Carbon Capture

Low-temperature hydrogen production from water and methanol using Pt/α-MoC catalysts

Experimental Study of Performance Enhancement Strategies for Hydrogen Production-Purification Systems in Packed-Bed Reactors under Power Fluctuations

PRODUCING HYDROGEN FROM JET-A FUEL IN A REACTOR WITH INTEGRATED AUTOTHERMAL REFORMING AND WATER-GAS SHIFT

Highly stable CuFe1.2Al.8O4 catalyst with low CO selectivity for hydrogen production in HT‐PEMFCs application