Abstract:Solid oxide fuel cell (SOFC) has attracted more and more attention for its advantages of high efficiency, low emission, and strong fuel adaptability. However, the fuel adaptability also brings issues for thermoelectric cooperative optimization of SOFC system because different fuel compositions can result in different thermal stresses and system performances. In this paper, the temperature distribution and electrical characteristics of a 1 kW external steam-reforming SOFC system at different power stages are studied based on the 200-hour experimental data obtained from the system fed by hydrogen and methane respectively. The thermoelectric characteristics of SOFC system using hydrogen and methane as fuels with the same output power are further compared. Furthermore, the influences of methane conversion rate (MCR) on the thermoelectric characteristics in SOFC system are analyzed through a mathematical SOFC system model and a Gaussian process regression (GPR) model is constructed to predict the MCR. The results show that, the stack voltage of the SOFC system fed by methane (CH4-SOFC) is lower than that of the SOFC system fed by hydrogen (H-2-SOFC) by 0.59-4.35 V for the hydrogen concentration at the anode is relatively low in the CH4-SOFC system. Meanwhile, the electrical efficiency of the CH4-SOFC system is lower than that of the H-2-SOFC system by 0.85-6.08% in the power range of 300-600 W. In terms of thermal characteristics, the stack temperature gradient on the fuel direction of the CH4-SOFC system is much larger than that of the H-2-SOFC system. Different methane conversion rates (MCRs) in the CH4-SOFC system can shift the stack temperature distribution significantly, and properly increasing the MCR can effectively increase the stack voltage and electrical efficiency. Finally, the GPR model can accurately predict the MCR and the MAPE is 0.030%, which can prevent the deformation and fracture of cells caused by the excessive temperature gradient in the stack when the MCR is too low. This work lays a foundation for system control strategy design in the future, especially SOFC stack thermal management, improving the fuel adaptability of the system and ensuring the safety of the stack temperature.

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Thermoelectrical-based Fuel Adaptability Analysis of Solid Oxide Fuel Cell System and Fuel Conversion Rate Prediction

Fuel adaptive analysis and methane conversion rate prediction based on Gaussian process regression for an SR-SOFC system

Modeling and evaluating of thermo-electro-chemo-mechanical behavior for pre-reformed methane-fueled solid oxide fuel cell

Power Generation from a Symmetric Flat-Tube Solid Oxide Fuel Cell Using Direct Internal Dry-Reforming of Methane

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Effects of methane steam reforming on the mechanical stability of solid oxide fuel cell stack

A Novel Design of Single-Chamber SOFC Micro-Stack Operated in Methane–oxygen Mixture

Energy and Parameter Analysis of SOFC System for Hydrogen Production from Methane Steam Reforming

Experimental study on reactor integrating catalytic combustion and steam reforming for 1 kW SOFC-CHP

Efficient Conversion of Methane into Power Via Microchanneled Solid Oxide Fuel Cells

High-rate Electrochemical Partial Oxidation of Methane in Solid Oxide Fuel Cells

Performance Evaluation of Solid Oxide Fuel Cell with In-Situ Methane Reforming

Syngas/power Cogeneration from Proton Conducting Solid Oxide Fuel Cells Assisted by Dry Methane Reforming: A Thermal-Electrochemical Modelling Study

Thermodynamic performance comparison of a SOFC system integrated with steam reforming and dry reforming by utilizing different fuels

Structure optimization and thermal field analysis of biogas derived methane fueled Solid Oxide Fuel Cell

Performance and Stress Analysis of Flat-Tubular Solid Oxide Fuel Cells Fueled with Methane and Hydrogen

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Thermoelectrical Comprehensive Analysis and Optimization of Multi-Stack Solid Oxide Fuel Cell System

Study on the Operating Parameters of the 10 Kw SOFC-CHP System with Syngas