Abstract:Solid oxide fuel cell (SOFC) has been regarded as one of the promising energy conversion technologies since it provides higher efficiency and lower pollution than conventional power systems. How to improve the SOFC efficiency is one of the focus issues in both industry and academia. Besides, when industrial-size SOFC is operated at high fuel utilization (U-fuel) to achieve high efficiency, the Ni anode in the downstream region may be locally oxidized due to the high oxygen partial pressure. Thus, operating conditions for both high efficiency and anode safety are required. In this work, a method for the measurement and evaluation of SOFC efficiency was established. By comparing the test results under different conditions (current, fuel flow rate, and temperature) with high fuel utilization, it was found that at the same fuel utilization, the voltage decreased as the current increased. Therefore, the lower current is beneficial for higher efficiency, while the higher current is beneficial for higher power. The relationship between voltage fluctuation and local oxidation of anode during operation at high fuel utilization was also studied. After analyzing the critical condition of Ni oxidation, the cell output voltage higher than the critical electromotive force of Ni oxidation was proposed as the safe operating condition to prevent local oxidation of anode. Based on the cell samples and test parameters used in this work, it was found a high efficiency of over 50% was corresponding to the fuel utilization range of 77% to 90%. And the maximum electrical efficiency was always corresponding to U-fuel=87.10%. Although the operating conditions corresponding to the maximum efficiency of SOFC cells or stacks with different materials, structures, and fabrication processes may vary, the measurement and evaluation methods, as well as the judgment of the safe operating condition proposed in this study, are still helpful. In practical application, the operating conditions could be determined based on such testing results according to the importance of efficiency, power and long-term stability.

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Performance Analysis of Flat-chip Solid Oxide Fuel Cells with Discrete Interconnector Designs

Numerical Simulation and Optimization of Operating and Structural Parameters for Solid Oxide Fuel Cell

The Progress on Research and Development of Tubular Solid Oxide Fuel Cell Stacks

Design and Fabrication of an Easily Assembled Anode Supported Microtubular SOFC Stack

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

The Recent Progress of Planar Solid Oxide Fuel Cell Stack

Performance test of a 5 kW solid oxide fuel cell system under high fuel utilization with industrial fuel gas feeding

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

Performance Evaluation of an Anode-Supported SOFC Short-Stack Operating with Different Fuel Blends as Stationary-CHP System

Propane-fuelled microtubular solid oxide fuel cell stack electrically connected by an anodic rectangular window

Numerical Study on Effects of Structure Parameters and Operating Conditions on the Micro-Tubular SOFC Stack Performance

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Comparison of Off-Gas Utilization Modes for Solid Oxide Fuel Cell Stacks Based on a Semi-Empirical Parametric Model

Numerical Investigation of Air Flow Characteristics for a Compact 5 × 10 Array Tubular Segmented-in-series Solid Oxide Fuel Cell Stack

Recent progresses in the development of tubular segmented-in-series solid oxide fuel cells: Experimental and numerical study

Micro-tubular Solid Oxide Fuel Cell Stack Operated with Catalytically Enhanced Porous Media Fuel-Rich Combustor

Optimizing Solid Oxide Fuel Cell Performance to Re-evaluate Its Role in the Mobility Sector

Numerical multi-physical optimization of operating condition and current collecting setup for large-area solid oxide fuel cells

New design and performance evaluation of 1 kW-class reversible solid oxide electrolysis-fuel cell stack using flat-tubular cells

Study of Operating Conditions for High Efficiency and Anode Safety of Industrial-Size Solid Oxide Fuel Cell