Abstract:Solid oxide fuel cells are not suitable for powering small portable devices, mainly because if built small, they need heat input to keep them running. A new approach to fuel-cell design tackles that problem head on, resulting in the first thermally self-sustaining miniature solid-oxide fuel cell. In this cell, the heat is from the oxidation reaction at the anode. Good power densities are achieved, and as proof of principle, the cell has successfully driven an MP3 player. High energy efficiency and energy density, together with rapid refuelling capability, render fuel cells highly attractive for portable power generation1,2. Accordingly, polymer-electrolyte direct-methanol fuel cells are of increasing interest as possible alternatives to Li ion batteries3. However, such fuel cells face several design challenges and cannot operate with hydrocarbon fuels of higher energy density. Solid-oxide fuel cells (SOFCs) enable direct use of higher hydrocarbons4,5,6, but have not been seriously considered for portable applications because of thermal management difficulties at small scales, slow start-up and poor thermal cyclability. Here we demonstrate a thermally self-sustaining micro-SOFC stack with high power output and rapid start-up by using single chamber operation on propane fuel. The catalytic oxidation reactions supply sufficient thermal energy to maintain the fuel cells at 500–600 °C. A power output of ∼350 mW (at 1.0 V) was obtained from a device with a total cathode area of only 1.42 cm2.

Propane-fuelled microtubular solid oxide fuel cell stack electrically connected by an anodic rectangular window

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

A Non-Sealed Solid Oxide Fuel Cell Micro-Stack with Two Gas Channels

Anode-Supported Micro-SOFC Stacks Operated under Single-Chamber Conditions

80 Hours operation of a tubular solid oxide fuel cell using propane/air

Design and Fabrication of an Easily Assembled Anode Supported Microtubular SOFC Stack

A Direct Flame Solid Oxide Fuel Cell for Potential Combined Heat and Power Generation

Development of Integrated Packaged Single Fuel Cell Short Stack Based on Titanium Metal Plates for Mobile Power Generation

Micro-tubular Solid Oxide Fuel Cell Stack Operated with Catalytically Enhanced Porous Media Fuel-Rich Combustor

A Novel Design of Single-Chamber SOFC Micro-Stack Operated in Methane–oxygen Mixture

A Thermally Self-Sustained Micro Solid-Oxide Fuel-Cell Stack with High Power Density

A Novel Cell‐Array Design for Single Chamber SOFC Microstack

Study of a Single‐Chamber Solid Oxide Fuel Cell Microstack with V‐Shaped Congener‐Electrode‐Facing Configuration

Direct Flame SOFCs with La[sub 0.75]sr[sub 0.25]cr[sub 0.5]mn[sub 0.5]o[sub 3−δ]∕ni Coimpregnated Yttria-Stabilized Zirconia Anodes Operated on Liquefied Petroleum Gas Flame

High and durable performance of an external-manifold designed reversible solid oxide cell stack

A Robust Flat-Chip Solid Oxide Fuel Cell Coupled with Catalytic Partial Oxidation of Methane

Feasibility study of an external manifold for planar intermediate- temperature solid oxide fuel cells stack

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Analysis of Gas Leakage and Current Loss of Solid Oxide Fuel Cells by Screen Printing

Propane Fueled Solid Oxide Fuel Cells

Development of a Compact High-Power Density Air-Cooled Proton Exchange Membrane Fuel Cell Stack with Ultrathin Steel Bipolar Plates