Abstract:It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.

A robust tubular solid oxide fuel cell through bifunctional praseodymium oxide nanocatalyst infiltration

High Performance Tubular Solid Oxide Fuel Cells With Bscf Cathode

80 Hours operation of a tubular solid oxide fuel cell using propane/air

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

Nanoengineering electrode for yttria-stabilized zirconia-based symmetrical solid oxide fuel cells to achieve superior output performance

A robust direct-propane solid oxide fuel cell with hierarchically oriented full ceramic anode consisting with in-situ exsolved metallic nano-catalysts

Enhanced Cathode/Electrolyte Interface by a Nano-Modified Barrier Layer for Solid Oxide Fuel Cells

A High-Strength Solid Oxide Fuel Cell Supported by an Ordered Porous Cathode Membrane

Optimization of Ni YSZ Anodes for Tubular SOFC by a Novel and Efficient Phase Inversion-Impregnation Approach

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

A Solid Oxide Fuel Cell Runs on Hydrocarbon Fuels with Exceptional Durability and Power Output

3D Core–shell Architecture from Infiltration and Beneficial Reactive Sintering As Highly Efficient and Thermally Stable Oxygen Reduction Electrode

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

Fabrication and Characterization of a Small Tubular Solid Oxide Fuel Cell with the La0.43Ca0.37Ni0.06Ti0.94O3-γ Anode

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Boosting Electrochemical Performance of a Nanocomposite Ni-GDC Anode Via Oxygen Vacancy and Ni Dispersion Modulation for Solid Oxide Fuel Cells

Surface-engineered ceramic anode with asymmetric microchannels for efficient power and syngas co-generation in solid oxide fuel cells

A Novel U-Shaped Anode-Supported Hollow Fiber Solid Oxide Fuel Cell with Considerable Thermal Cycling Performance and Stability

Electrochemical Property of Multi-Layer Anode Supported Solid Oxide Fuel Cell Fabricated Through Sequential Tape-Casting and Co-Firing

Boosting the Performance and Stability of Perovskites by Construction of NiFe Alloy and PrOx Heterogeneously Structured Composites for High‐Performance Solid Oxide Fuel Cell Anode