Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method

High performance low temperature solid oxide fuel cells with novel electrode architecture

High-Performance Low-Temperature Solid Oxide Fuel Cell with a Pt@C–Ni 0.8 Co 0.15 Al 0.05 LiO 2−δ Composite Cathode

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

High Performance Low-Temperature Solid Oxide Fuel Cells Based on Nanostructured Ceria-Based Electrolyte

Hierarchically oriented macroporous anode-supported solid oxide fuel cell with thin ceria electrolyte film.

High performance proton-conducting solid oxide fuel cells with a stable Sm0.5Sr0.5Co3-δ-Ce0.8Sm0.2O2-δ composite cathode

An A-Site-Deficient Perovskite Offers High Activity And Stability For Low-Temperature Solid-Oxide Fuel Cells

3D Core–shell Architecture from Infiltration and Beneficial Reactive Sintering As Highly Efficient and Thermally Stable Oxygen Reduction Electrode

Scaffold Infiltrated Cathodes for Low-Temperature Solid Oxide Fuel Cells

High-performance cathode-supported SOFCs prepared by a single-step co-firing process

Self‐Assembled Perovskite Nanocomposite With Beneficial Lattice Tensile Strain as High Active and Durable Cathode for Low Temperature Solid Oxide Fuel Cell

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

High-Performance Srnb0.1co0.9-Xfexo3-Delta Perovskite Cathodes For Low-Temperature Solid Oxide Fuel Cells

Preparation and characterization of Sm0.2Ce0.8O1.9/Na2CO3 nanocomposite electrolyte for low-temperature solid oxide fuel cells

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes