Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Boosting Electrochemical Performance of a Nanocomposite Ni-GDC Anode Via Oxygen Vacancy and Ni Dispersion Modulation for Solid Oxide Fuel Cells

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Perovskite Chromite With In-Situ Assembled Ni-Co Nano-Alloys: A Potential Bifunctional Electrode Catalyst for Solid Oxide Cells

A Robust Carbon Tolerant Anode for Solid Oxide Fuel Cells

Nanostructured Lscf-GDC Cathodes Via a Sol–Gel Method for High Performance Solid Oxide Fuel Cells

High-performance Ni In-Situ Exsolved Ba(Ce0.9Y0.1)0.8Ni0.2O3-δ/Gd0.1Ce0.9O1.95 Composite Anode for SOFC with Long-Term Stability in Methane Fuel

Boosting the performance and durability of heterogeneous electrodes for solid oxide electrochemical cells utilizing a data-driven powder-to-power framework

Nickel‐Regulated Composite Cathode with Balanced Triple Conductivity for Proton‐Conducting Solid Oxide Fuel Cells

Nano-structured composite cathodes for intermediate-temperature solid oxide fuel cells via an infiltration/impregnation technique

Nano-Structured Anodes of Solid Oxide Fuel Cells

Enhanced oxygen reduction kinetics by a porous heterostructured cathode for intermediate temperature solid oxide fuel cells

A Rational Design of FeNi Alloy Nanoparticles and Carbonate-Decorated Perovskite As a Highly Active and Coke-Resistant Anode for Solid Oxide Fuel Cells

A Novel Method to Purposely Modify the Anode/Electrolyte Interface in Solid Oxide Fuel Cells

Highly Active Self-Assembled Hybrid Catalyst with Multiphase Heterointerfaces to Accelerate Cathodic Oxygen Reduction of Intermediate-Temperature Solid Oxide Fuel Cells

Exsolved Nanoparticles Decorated Double Perovskites as High-Performance Anodes for Direct-Ammonia Solid Oxide Fuel Cells

A robust tubular solid oxide fuel cell through bifunctional praseodymium oxide nanocatalyst infiltration

Effectively Promoting Activity and Stability of a MnCo2O4-Based Cathode by In Situ Constructed Heterointerfaces for Solid Oxide Fuel Cells

In situ self-assembled NdBa0.5Sr0.5Co2O5+δ/Gd0.1Ce0.9O2-δ hetero-interfaces enable enhanced electrochemical activity and CO2 durability for solid oxide fuel cells

Enhancing Electrode Performance by Exsolved Nanoparticles: A Superior Cobalt-Free Perovskite Electrocatalyst for Solid Oxide Fuel Cells.

Nanocomposite Electrode Materials for Low Temperature Solid Oxide Fuel Cells Using the Ceria-Carbonate Composite Electrolytes