Abstract:According to the recent development trend of the smart farm industry, solid oxide fuel cells are emerging as a sustainable power source due to their high fuel efficiency and fuel flexibility which includes carbon fuels such as carbon monoxide. This study conducted a series of experiments to secure an operation strategy for a solid oxide fuel cell operating at the intermediate temperature of 650~800C. Although it is known that when a fuel cell is operated using carbon-based fuel at an intermediate temperature under 800C, fatal degradation occurs due to carbon coking, widely used commercial fuel cell stacks were manufactured not to exceed that temperature. To simulate a commercial fuel cell stack, the experiment was conducted in the commercial operating temperature range, and nickel-yttria stabilized zirconia was used as anode material. Additionally, ceria-based anode material was applied, and compared its single-cell performance with that of the yttria-based anode material. Carbon monoxide-hydrogen mixed fuel, which can be produced through torrefaction and fuelization from agricultural by-products, was supplied. To this end, a YSZ-based electrolyte-supported cell using Ni-YSZ/Ni-GDC and LSCF-GDC as anode and cathode materials, respectively, was fabricated by the sputtering method. The cell performance and degradation phenomenon were measured under the two temperature ranges and two fuel supply conditions. For structural analysis, FE-SEM and FIB-SEM methods were conducted, and techniques such as the i-V-P curve, EIS, and DRT were used for their electrochemical analysis. The relationship between the nano-scaled structural change caused by the carbon coking phenomenon and the cell performance was derived. Especially, EDS mapping and XPS analyses were conducted to quantify the carbon coking phenomenon. Through this, the degradation mechanism mainly caused by carbon coking was analyzed when syngas was used as a fuel. The optimal operating condition for durable fuel cell performance was confirmed for the stack-sized operation in the smart farm industry.

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Analysis of Gas Leakage and Current Loss of Solid Oxide Fuel Cells by Screen Printing

Study on Component Interface Evolution of a Solid Oxide Fuel Cell Stack after Long Term Operation

Long-Term Test of a Solid Oxide Fuel Cell Stack with External Manifold Structure

Degradation mechanisms and mitigation strategies of direct methane solid oxide fuel cells

Degradation of Solid Oxide Fuel Cell Using Thin Film Electrodes Fueled By Carbon Monoxide-Hydrogen Syngas

Performance Degradation and Analysis of 10-Cell Anode-Supported SOFC Stack with External Manifold Structure

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Improvement on Durability and Thermal Cycle Performance for Solid Oxide Fuel Cell Stack with External Manifold Structure

Transient Thermomechanical Analysis of a 1 Kw Solid Oxide Fuel Cell Stack Based on 3D Multiphysical Field Model

Long-term thermo-mechanical performance evolution of a 15-cell solid oxide fuel cell stack

Anode-Supported Micro-SOFC Stacks Operated under Single-Chamber Conditions

Preparation and Properties of Direct-Methane Solid Oxide Fuel Cell Based on a Graded Cu-CeO<sub>2</sub>-Ni-YSZ Composite Anode

In-situ Analysis of Anode Atmosphere in a Flat-Tube Solid Oxide Fuel Cell Operated with Dry Reforming of Methane

Direct Operation of Solid Oxide Fuel Cells with Methane Fuel

Long‐Term Behavior of a Solid Oxide Electrolyzer (SOEC) Stack▴

Long-term Stability of Metal-Supported Solid Oxide Fuel Cells Employing in Fi Ltrated Electrodes

High-performance Ni In-Situ Exsolved Ba(Ce0.9Y0.1)0.8Ni0.2O3-δ/Gd0.1Ce0.9O1.95 Composite Anode for SOFC with Long-Term Stability in Methane Fuel

Comparative study on solid oxide fuel cell anode microstructure evolution after long-term operation

Nickel Depletion and Agglomeration in SOFC Anodes During Long‐Term Operation