Abstract:According to the recent development trend of the smart farm industry, solid oxide fuel cells are emerging as a sustainable power source due to their high fuel efficiency and fuel flexibility which includes carbon fuels such as carbon monoxide. This study conducted a series of experiments to secure an operation strategy for a solid oxide fuel cell operating at the intermediate temperature of 650~800C. Although it is known that when a fuel cell is operated using carbon-based fuel at an intermediate temperature under 800C, fatal degradation occurs due to carbon coking, widely used commercial fuel cell stacks were manufactured not to exceed that temperature. To simulate a commercial fuel cell stack, the experiment was conducted in the commercial operating temperature range, and nickel-yttria stabilized zirconia was used as anode material. Additionally, ceria-based anode material was applied, and compared its single-cell performance with that of the yttria-based anode material. Carbon monoxide-hydrogen mixed fuel, which can be produced through torrefaction and fuelization from agricultural by-products, was supplied. To this end, a YSZ-based electrolyte-supported cell using Ni-YSZ/Ni-GDC and LSCF-GDC as anode and cathode materials, respectively, was fabricated by the sputtering method. The cell performance and degradation phenomenon were measured under the two temperature ranges and two fuel supply conditions. For structural analysis, FE-SEM and FIB-SEM methods were conducted, and techniques such as the i-V-P curve, EIS, and DRT were used for their electrochemical analysis. The relationship between the nano-scaled structural change caused by the carbon coking phenomenon and the cell performance was derived. Especially, EDS mapping and XPS analyses were conducted to quantify the carbon coking phenomenon. Through this, the degradation mechanism mainly caused by carbon coking was analyzed when syngas was used as a fuel. The optimal operating condition for durable fuel cell performance was confirmed for the stack-sized operation in the smart farm industry.

Degradation mechanisms and mitigation strategies of direct methane solid oxide fuel cells

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Control of carbon deposition over methane-fueled SOFCs through tuning the O/C ratio at the anode/electrolyte interface

Degradation of Solid Oxide Fuel Cell Using Thin Film Electrodes Fueled By Carbon Monoxide-Hydrogen Syngas

Analysis of Gas Leakage and Current Loss of Solid Oxide Fuel Cells by Screen Printing

Numerical simulation of carbon deposition in solid oxide fuel cells

Long-Term Operation and Post Analysis of a Stack with Methane Fuel

Navigating the future of solid oxide fuel cell: Comprehensive insights into fuel electrode related degradation mechanisms and mitigation strategies

Cell-protecting Regeneration from Anode Carbon Deposition Using in Situ Produced Oxygen and Steam: A Combined Experimental and Theoretical Study

A review on anode on-cell catalyst reforming layer for direct methane solid oxide fuel cells

Coking-resistant Ce0.8Ni0.2O2-δ Internal Reforming Layer for Direct Methane Solid Oxide Fuel Cells

Direct liquid methanol-fueled solid oxide fuel cell

Failure Mechanism and Optimization of Metal-Supported Solid Oxide Fuel Cells

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Co‐Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells

Direct-methane Solid Oxide Fuel Cells with an in Situ Formed Ni–Fe Alloy Composite Catalyst Layer over Ni–YSZ Anodes

Direct methanol oxygen-ion conducting solid oxide fuel cell with an integrated in-situ cracking reactor

In-situ Analysis of Anode Atmosphere in a Flat-Tube Solid Oxide Fuel Cell Operated with Dry Reforming of Methane

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

Performance and Long-Term Durability of Direct-Methane Flat-Tube Solid Oxide Fuel Cells with Symmetric Double-Sided Cathodes

Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer