Abstract:Direct utilization of methane in solid oxide fuel cells (SOFCs) is greatly impeded by the grievous carbon deposition and the much depressed catalytic activity. In this work, a promising anode, taking finger-like porous YSZ as the anode substrate and impregnated Ni0.08Co0.02Ce0.9O2−δ@Ni0.8Co0.2O as the novel catalyst, is fabricated via the phase conversion-combined tape-casting technique. This anode shows commendable mechanical strength and excellent catalytic activity and stability toward the methane conversion reactions, which is attributed to the exsolved alloy nanoparticles and the active oxygen species on the reduced Ni0.08Co0.02Ce0.9O2−δ catalyst as well as the facilitated methane transport rooting in the special open-pore microstructure of the anode substrate. Strikingly, this button cell delivers an excellent peak power density of 730 mW cm–2 at 800 °C in 97% CH4/3% H2O fuel, only 9% lower than that in 97% H2/3% H2O. Our work shed new light on the SOFC anode developments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17339?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17339</a>.Pore size distribution of the YSZ backbone, XRD results of NCCO and NCO, TPR profile of NCCO, XPS spectra of Ce 3d in NCCO and NC-CeO2–x, TEM results of NCCO and NC-CeO2–x, I–V–P plots, EIS and SEM results of button cells, and SVUV-PIMS results of methane conversions (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17339/suppl_file/am0c17339_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Direct-methane Solid Oxide Fuel Cells with an in Situ Formed Ni–Fe Alloy Composite Catalyst Layer over Ni–YSZ Anodes

A NiFeCu alloy anode catalyst for direct-methane solid oxide fuel cells

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

Infiltrated Ni0.08Co0.02Ce0.02CeO2-x@Ni0.8Co0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Ni and Ru bimetal nanoparticles-anchored porous Mo 2 C nanorods used as an internal reforming catalyst layer for hydrocarbon-fueled solid oxide fuel cells

Anode Catalyst Layers for Direct Hydrocarbon and Internal Reforming SOFCs

Methane-fueled SOFC with Traditional Nickel-Based Anode by Applying Ni/Al2O3 As a Dual-Functional Layer

Ceria coated Ni as anodes for direct utilization of methane in low-temperature solid oxide fuel cells

Direct power generation from methanol by solid oxide fuel cells with a Cu-ceria based catalyst layer

Robust Ni-based Anode Deposited with La0.6Sr0.4FeO3-δfor Direct Methane-Fueled SOFCs

Catalytic Activity of Ni-YSZ Composite As Anode for Methane Oxidation in Solid Oxide Fuel Cells

Proton-Conducting La-Doped Ceria-Based Internal Reforming Layer for Direct Methane Solid Oxide Fuel Cells

Enhanced coking resistance of a Ni cermet anode by a chromates protective layer

An Efficient Construction of Nano-Interfaces for Excellent Coking Tolerance of Cermet Anodes

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Infiltrated Ni 0.08 Co 0.02 CeO 2– x @Ni 0.8 Co 0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer

Surface Tuned La 0.9 Ca 0.1 Fe 0.9 Nb 0.1 O 3-Δ Based Anode for Direct Methane Solid Oxide Fuel Cells by Infiltration Method

A robust direct-propane solid oxide fuel cell with hierarchically oriented full ceramic anode consisting with in-situ exsolved metallic nano-catalysts

Methane On-Cell Reforming by Alloys Reduced from Ni0.5cu0.5fe2o4 for Direct-Hydrocarbon Solid Oxide Fuel Cells