Abstract:Direct utilization of methane in solid oxide fuel cells (SOFCs) is greatly impeded by the grievous carbon deposition and the much depressed catalytic activity. In this work, a promising anode, taking finger-like porous YSZ as the anode substrate and impregnated Ni0.08Co0.02Ce0.9O2−δ@Ni0.8Co0.2O as the novel catalyst, is fabricated via the phase conversion-combined tape-casting technique. This anode shows commendable mechanical strength and excellent catalytic activity and stability toward the methane conversion reactions, which is attributed to the exsolved alloy nanoparticles and the active oxygen species on the reduced Ni0.08Co0.02Ce0.9O2−δ catalyst as well as the facilitated methane transport rooting in the special open-pore microstructure of the anode substrate. Strikingly, this button cell delivers an excellent peak power density of 730 mW cm–2 at 800 °C in 97% CH4/3% H2O fuel, only 9% lower than that in 97% H2/3% H2O. Our work shed new light on the SOFC anode developments.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17339?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17339</a>.Pore size distribution of the YSZ backbone, XRD results of NCCO and NCO, TPR profile of NCCO, XPS spectra of Ce 3d in NCCO and NC-CeO2–x, TEM results of NCCO and NC-CeO2–x, I–V–P plots, EIS and SEM results of button cells, and SVUV-PIMS results of methane conversions (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17339/suppl_file/am0c17339_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Methane-fueled SOFC with Traditional Nickel-Based Anode by Applying Ni/Al2O3 As a Dual-Functional Layer

Direct-methane solid oxide fuel cells with an <i>in situ</i> formed Ni-Fe alloy composite catalyst layer over Ni-YSZ anodes

Enhanced coking resistance of a Ni cermet anode by a chromates protective layer

Enhanced Coking Resistance of Ni Cermet Anodes for Solid Oxide Fuel Cells Based on Methane On‐cell Reforming by a Redox‐stable Double‐perovskite Sr 2 MoFeO 6‐Δ

A NiFeCu alloy anode catalyst for direct-methane solid oxide fuel cells

Ni and Ru bimetal nanoparticles-anchored porous Mo 2 C nanorods used as an internal reforming catalyst layer for hydrocarbon-fueled solid oxide fuel cells

Anode supported SOFC fabricated with functional anode: role of variation of fuel and oxidants

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Catalytic Modification of Ni–Sm-doped Ceria Anodes with Copper for Direct Utilization of Dry Methane in Low-Temperature Solid Oxide Fuel Cells

Infiltrated Ni 0.08 Co 0.02 CeO 2– x @Ni 0.8 Co 0.2 Catalysts for a Finger-Like Anode in Direct Methane-Fueled Solid Oxide Fuel Cells

Rational Design of Superior, Coking-Resistant, Nickel-Based Anodes Through Tailoring Interfacial Reactions for Solid Oxide Fuel Cells Operated on Methane Fuel.

Catalyst layer supported solid oxide fuel cells running on methane

Performance of Ni/Scsz Cermet Anode Modified by Coating with Gd0.2ce0.8o2 for an Sofc Running on Methane Fuel

Coking-resistant Ce0.8Ni0.2O2-δ Internal Reforming Layer for Direct Methane Solid Oxide Fuel Cells

Direct power generation from methanol by solid oxide fuel cells with a Cu-ceria based catalyst layer

Proton-Conducting La-Doped Ceria-Based Internal Reforming Layer for Direct Methane Solid Oxide Fuel Cells

La0.6Sr0.4Co0.2Fe0.8O3-δ Nanoparticles Modified Ni-based Anode for Direct Methane-Fueled SOFCs

Single-chamber solid oxide fuel cells with nanocatalyst-modified anodes capable of in situ activation

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Performance and durability of a layered proton conducting solid oxide fuel cell fueled by the dry reforming of methane

Co-Generation of Electricity and Syngas on Proton-Conducting Solid Oxide Fuel Cell with A Perovskite Layer As A Precursor of A Highly Efficient Reforming Catalyst