Abstract:According to the recent development trend of the smart farm industry, solid oxide fuel cells are emerging as a sustainable power source due to their high fuel efficiency and fuel flexibility which includes carbon fuels such as carbon monoxide. This study conducted a series of experiments to secure an operation strategy for a solid oxide fuel cell operating at the intermediate temperature of 650~800C. Although it is known that when a fuel cell is operated using carbon-based fuel at an intermediate temperature under 800C, fatal degradation occurs due to carbon coking, widely used commercial fuel cell stacks were manufactured not to exceed that temperature. To simulate a commercial fuel cell stack, the experiment was conducted in the commercial operating temperature range, and nickel-yttria stabilized zirconia was used as anode material. Additionally, ceria-based anode material was applied, and compared its single-cell performance with that of the yttria-based anode material. Carbon monoxide-hydrogen mixed fuel, which can be produced through torrefaction and fuelization from agricultural by-products, was supplied. To this end, a YSZ-based electrolyte-supported cell using Ni-YSZ/Ni-GDC and LSCF-GDC as anode and cathode materials, respectively, was fabricated by the sputtering method. The cell performance and degradation phenomenon were measured under the two temperature ranges and two fuel supply conditions. For structural analysis, FE-SEM and FIB-SEM methods were conducted, and techniques such as the i-V-P curve, EIS, and DRT were used for their electrochemical analysis. The relationship between the nano-scaled structural change caused by the carbon coking phenomenon and the cell performance was derived. Especially, EDS mapping and XPS analyses were conducted to quantify the carbon coking phenomenon. Through this, the degradation mechanism mainly caused by carbon coking was analyzed when syngas was used as a fuel. The optimal operating condition for durable fuel cell performance was confirmed for the stack-sized operation in the smart farm industry.

Cell-protecting Regeneration from Anode Carbon Deposition Using in Situ Produced Oxygen and Steam: A Combined Experimental and Theoretical Study

Degradation mechanisms and mitigation strategies of direct methane solid oxide fuel cells

Numerical simulation of carbon deposition in solid oxide fuel cells

High Temperature Thermo-Photocatalysis Driven Carbon Removal in Direct Biogas Fueled Solid Oxide Fuel Cells

Anode Catalysts for Solid Oxide Fuel Cells That Run Directly on Hydrocarbon Fuels

Insight into Carbon Removal from Solid Oxide Fuel Cells via Operando Spectroscopy

Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer

Controlled Deposition and Utilization of Carbon on Ni-Ysz Anodes of Sofcs Operating on Dry Methane

Evaluation of Carbon Deposition Behavior on the Nickel/yttrium-Stabilized Zirconia Anode-Supported Fuel Cell Fueled with Simulated Syngas

Experimental and Modeling Study of High Performance Direct Carbon Solid Oxide Fuel Cell with in Situ Catalytic Steam-Carbon Gasification Reaction

A Robust Carbon Tolerant Anode for Solid Oxide Fuel Cells

Anodes for Carbon‐Fueled Solid Oxide Fuel Cells

Clean and Stable Conversion of Oxygen-Bearing Low-Concentration Coal Mine Gas by Solid Oxide Fuel Cells with an Additional Reforming Layer

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

A Solid Oxide Fuel Cell Runs on Hydrocarbon Fuels with Exceptional Durability and Power Output

Construction of a Transient Multi-Physics Model of Solid Oxide Fuel Cell Fed by Biomass Syngas Considering the Carbon Deposition and Temperature Effect

Surface-engineered ceramic anode with asymmetric microchannels for efficient power and syngas co-generation in solid oxide fuel cells

A robust tubular solid oxide fuel cell through bifunctional praseodymium oxide nanocatalyst infiltration

Degradation of Solid Oxide Fuel Cell Using Thin Film Electrodes Fueled By Carbon Monoxide-Hydrogen Syngas

Co‐Generation of Electricity and Chemicals From Methane Using Direct Internal Reforming Solid Oxide Fuel Cells

Solid Oxide Fuel Cells Fueled by Simulated Biogas: Comparison of Anode Modification by Infiltration and Reforming Catalytic Layer