Abstract:Solid oxide fuel cell technology is the technology which can be driving force to change the course of action of the modern era due to its optimal power generation features with maximum electrical efficiency for automobiles and household devices. Fuel cells can be best described as electrochemical devices that make use of fuel oxidation to convert chemical energy into electrical energy and also lower the amount of oxidant simultaneously.A typical SOFC consists of a cathode, anode and an electrolyte constituting a single cell. These single cells are stacked together for a bigger assembly to produce higher degree of power. The solid electrolyte fills the gap between the cathode and anode transporting O2− ions only. This leaves out electrons as transporting medium, which then pass through the cell via external circuit. Out of the two electrodes, oxidation of fuel takes place at the anode and reduction of oxygen takes place at the cathode. The SOFCs operate at higher temperatures of 600–1200°C producing heat as a byproduct of high quality, actively encouraging quick electrocatalysis utilizing non-precious metals and allowing internal restructuration. The SOFC can also work with high purity hydrogen for proton transport other than O2− ion transport. There are many ceramic materials which have been engineered to act as efficient electrolyte materials. Yttria-stabilized zirconia (YSZ) is the most widely used material as solid electrolyte in SOFC.The present review presents a detailed overview of the SOFC related materials and devices and is an effort to present various reported works in a concise manner.

Anodes for Carbon‐Fueled Solid Oxide Fuel Cells

Solid Oxide Fuel Cell Anode Materials for Direct Hydrocarbon Utilization

Anode Catalysts for Solid Oxide Fuel Cells That Run Directly on Hydrocarbon Fuels

Research Development on Novel Anode of Solid Oxide Direct Carbon Fuel Cells

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Progress report on the catalyst layers for hydrocarbon-fueled SOFCs

Perovskite As Anode Materials for Solid Oxide Fuel Cells

Solid oxide fuel cell: Materials for anode, cathode and electrolyte

Advanced Perovskite Anodes for Solid Oxide Fuel Cells: A Review

A Solid Oxide Fuel Cell Runs on Hydrocarbon Fuels with Exceptional Durability and Power Output

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Progress on the Anode Materials for Solid Oxide Fuel Cells (SOFC) and Its Application for Hydrogen Production through High Temperature Steam Electrolysis

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Recent Progress on the Materials of Oxygen Ion-Conducting Solid Oxide Fuel Cells and Experimental Analysis of Biogas-Assisted Electrolysis over a LSC Anode

Cell-protecting Regeneration from Anode Carbon Deposition Using in Situ Produced Oxygen and Steam: A Combined Experimental and Theoretical Study

Rational Design of a Water‐Storable Hierarchical Architecture Decorated with Amorphous Barium Oxide and Nickel Nanoparticles As a Solid Oxide Fuel Cell Anode with Excellent Sulfur Tolerance

Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Prospect of carbon-based solid oxide fuel cells

A comprehensive review of solid oxide fuel cells operating on various promising alternative fuels

Surface-engineered ceramic anode with asymmetric microchannels for efficient power and syngas co-generation in solid oxide fuel cells