Abstract:Direct carbon solid oxide fuel cells (DC-SOFCs) can convert solid carbon directly to electricity via electrochemical oxidation and require less investment compared to other liquid or gas-fed fuel cells. Anode characteristic is one of the important factors in achieving efficient and stable operation of DC-SOFCs. In this work, we have successfully designed and developed 2D multi-physics field models for DC-SOFCs with finger-like nickel-based anode (Cell-A) and traditional nickel-based anode (Cell-B), respectively. Simulation results revealed that the cell performance was significantly enhanced with increases in the anode porosity and decreases in the distance of carbon fuel to porous anode. More importantly, the anode featuring a finger-like pore structure assumed a pivotal role in cell performance. Specifically, Cell-A exhibited higher electrochemical performance compared to Cell-B due to the lower resistance for gas transport and more abundant amount of three-phase boundaries for electrochemical reactions. Experimental results verified the simulation findings by making and operating these two DC-SOFCs. The fabricated Cell-A with finger-like anode delivered higher power output of 858 and 371 mW cm−2 at 850 °C when fueled with hydrogen and activated carbon, respectively, relative to Cell-B with traditional anode. The beneficial characteristic of finger-like anode was further demonstrated by the ability of Cell-A to retain stable operation for 14.1 h at 100 mA with the fuel utilization of 15.8% at 850 °C. This study provides important guidance for the design and improvement of DC-SOFCs, and promotes the sustainable utilization of carbon resources.

Research Development on Novel Anode of Solid Oxide Direct Carbon Fuel Cells

Research and Development of Solid Oxide Direct Carbon Fuel Cell

An Analysis of Technical Research Advances in Direct Carbon Fuel Cell Technology

Anodes for Carbon‐Fueled Solid Oxide Fuel Cells

Solid Oxide Fuel Cell Anode Materials for Direct Hydrocarbon Utilization

Simulation-guided design of a finger-like nickel-based anode for enhanced performance of direct carbon solid oxide fuel cells

Development of the Cathode Catalyst for Direct Borohydride Fuel Cell

Achieving Direct Electrochemical Oxidation of Carbon below 600oC through a Novel Direct Carbon Fuel Cell

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Anode Catalysts for Solid Oxide Fuel Cells That Run Directly on Hydrocarbon Fuels

Research Progress of Anode Catalysts for Direct Methanol Fuel Cell

A Promising Direct Carbon Fuel Cell Based on the Cathode-Supported Tubular Solid Oxide Fuel Cell Technology

Direct-Methane Solid Oxide Fuel Cells with Hierarchically Porous Ni-Based Anode Deposited with Nanocatalyst Layer

Perovskite As Anode Materials for Solid Oxide Fuel Cells

Enhanced electrochemical performance and durability for direct CH4–CO2 solid oxide fuel cells with an on-cell reforming layer

Mechanism for carbon direct electrochemical reactions in a solid oxide electrolyte direct carbon fuel cell

Advanced Perovskite Anodes for Solid Oxide Fuel Cells: A Review

Progress on the Anode Materials for Solid Oxide Fuel Cells (SOFC) and Its Application for Hydrogen Production through High Temperature Steam Electrolysis

Boosting Electrochemical Performance of a Nanocomposite Ni-GDC Anode Via Oxygen Vacancy and Ni Dispersion Modulation for Solid Oxide Fuel Cells

Promotion of water-mediated carbon removal by nanostructured barium oxide/nickel interfaces in solid oxide fuel cells

High-Temperature CO2 Electrolysis in Solid Oxide Electrolysis Cells: Developments, Challenges, and Prospects