Abstract:Solid oxide cell (SOC) technology is highly admissible for distributed power generation since it enables the most efficient and clean conversion of fuels into energy and heat. SOCs are also regarded as a potential technology for their decisive role in strengthening the hydrogen economy concept by storing renewable energy resources such as green hydrogen and synthetic fuels. In this work, high-performance and durable flat tubular anode-supported SOC is developed for SOC stack applications. NiO-8YSZ composite flat tubular anode support is fabricated by employing an extrusion process. Anode functional layer and electrolyte layers are deposited by the dip-coating technique, whereas the GDC diffusion barrier, LSCF-GDC composite cathode, and Ag-glass composite interconnect layers are fabricated by the conventional screen-printing process. Finally, the prepared flat tubular SOCs possess an active cathode area of 45 cm 2 and demonstrated a high-power density of ~430 mW cm -2 at operating current density, voltage, and temperature conditions of 501 mA cm -2 , 0.87 V, and 700 °C. During a long-term stability test at 700 °C for 1000 h, the SOC showed a voltage improvement of 0.013 % while operating at a fuel efficiency of 65%. The flat tubular anode-supported SOC’s high performance and durable operation showed its potential for commercial applications in distributed power generation and hydrogen production. Together with the research to further enhance the SOC’s performance and stability, the flat tubular SOC stack design and fabrication are also in progress.

Design and Fabrication of an Easily Assembled Anode Supported Microtubular SOFC Stack

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

From Concept to Commercialization: A Review of Tubular Solid Oxide Fuel Cell Technology

Fabrication Techniques and Stack Assembling Methods for Micro Tubular Solid Oxide Fuel Cells

Anode-Supported Micro-SOFC Stacks Operated under Single-Chamber Conditions

A Novel Cell‐Array Design for Single Chamber SOFC Microstack

A Non-Sealed Solid Oxide Fuel Cell Micro-Stack with Two Gas Channels

Thermally Sprayed Large Tubular Solid Oxide Fuel Cells and Its Stack: Geometry Optimization, Preparation, and Performance

The Progress on Research and Development of Tubular Solid Oxide Fuel Cell Stacks

A Novel Design of Single-Chamber SOFC Micro-Stack Operated in Methane–oxygen Mixture

Propane-fuelled microtubular solid oxide fuel cell stack electrically connected by an anodic rectangular window

Micro-Tubular Solid Oxide Fuel Cell with Asymmetric Structure Anode and La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode

Study of a Single‐Chamber Solid Oxide Fuel Cell Microstack with V‐Shaped Congener‐Electrode‐Facing Configuration

Performance Degradation and Analysis of 10-Cell Anode-Supported SOFC Stack with External Manifold Structure

Fabrication and Characterization of High Performance Intermediate Temperature Micro-Tubular Solid Oxide Fuel Cells

Fabrication of Durable and High-Performance Flat Tubular Anode-Supported Solid Oxide Cells for Stack Application

Numerical Investigation of Air Flow Characteristics for a Compact 5 × 10 Array Tubular Segmented-in-series Solid Oxide Fuel Cell Stack

Long-Term Test of a Solid Oxide Fuel Cell Stack with External Manifold Structure

New design and performance evaluation of 1 kW-class reversible solid oxide electrolysis-fuel cell stack using flat-tubular cells

Study on Component Interface Evolution of a Solid Oxide Fuel Cell Stack after Long Term Operation

Research Progress of Anode-Supported Micro-Tubular Solid Oxide Fuel Cells