Abstract:This study established a zero-dimensional numerical model integrating methanol steam reforming (MSR) and high-temperature proton exchange membrane fuel cells (HT-PEMFC), systematically investigating the effects of parameters such as steam-methanol (S/C) ratio, reformer reaction temperature, methanol catalytic combustion ratio, fuel cell number, and anode stoichiometry on the thermal, mass, electrical, and efficiency performance parameters of the integrated system. The results confirmed that the integrated system can achieve thermal self-sustained operation without the need for additional heat from methanol catalytic combustion. Improved insulation quality enables the attainment of thermal self-sufficiency at lower operating conditions. The molar ratio of CO in the reformate increases with a decrease in the S/C ratio and an increase in the reformer reaction temperature. The system achieves maximum output power and efficiency when S/C equals 1.25 and the reformer temperature is 513 K, with increases of 8.6 % and 37.1 %, respectively. The system efficiency is highly sensitive to the anode stoichiometry of the fuel cell, showing an 11.7 % improvement as the stoichiometry decreases from 2.0 to 1.2. Based on these results, three improvement measures were proposed to enhance the performance of MSR and HT-PEMFC integrated systems: improving system insulation to lower thermal self-sufficiency conditions, optimizing the stoichiometry of the bipolar plates for significant efficiency improvement, and selecting appropriate operating parameters for system components to enhance overall performance. This study quantitatively demonstrates the potential of these measures to improve system performance, providing valuable insights for the design and optimization of integrated systems.

Energy and Parameter Analysis of SOFC System for Hydrogen Production from Methane Steam Reforming

Optimization of Methane Reforming for High Efficiency and Stable Operation of SOFC Stacks

Thermodynamic performance comparison of a SOFC system integrated with steam reforming and dry reforming by utilizing different fuels

Experimental study on reactor integrating catalytic combustion and steam reforming for 1 kW SOFC-CHP

Thermodynamic Analysis Of An Integrated Power Generation System Driven By Solid Oxide Fuel Cell

Syngas/power Cogeneration from Proton Conducting Solid Oxide Fuel Cells Assisted by Dry Methane Reforming: A Thermal-Electrochemical Modelling Study

Influences of Hydrogen-Natural Gas Mixtures on The Performance of an Internal Reforming Solid Oxide Fuel Cell Unit: A Simulation Study

Development of Solid Oxide Fuel Cell/Gas Turbine Hybrid Power System and Research of Methane Steam Reforming

Thermodynamic analysis of an SOFC-GT-ORC integrated power system with liquefied natural gas as heat sink

Numerical Simulation of an Internal Reforming Solid Oxide Fuel Cell Unit Fueled with Hydrogen-Natural Gas Mixtures

Combined Methane Reforming by Carbon Dioxide and Steam in Proton Conducting Solid Oxide Fuel Cells for Syngas/power Co-Generation

Thermal Modeling and Management of Solid Oxide Fuel Cells Operating with Internally Reformed Methane

Design and Energy Efficiency Analysis of Hydrogen - Fueled SOFC-‘GT+ST’ Combined Cycle System

Study on the Operating Parameters of the 10 Kw SOFC-CHP System with Syngas

Modeling and evaluating of thermo-electro-chemo-mechanical behavior for pre-reformed methane-fueled solid oxide fuel cell

Performance and Stress Analysis of Flat-Tubular Solid Oxide Fuel Cells Fueled with Methane and Hydrogen

Optimization of a 30 Kw SOFC Combined Heat and Power System with Different Cycles and Hydrocarbon Fuels

System Simulation and Parametric Analysis of Low-Concentration Coal Mine Gas Fed SOFC-CHP with Deoxygenation and Enrichment Pretreatment

Autothermal reforming of methane over an integrated solid oxide fuel cell reactor for power and syngas co-generation

Optimization of solid oxide fuel cell system integrated with biomass gasification, solar-assisted carbon capture and methane production

Coupling of high-temperature proton exchange membrane fuel cells with methanol steam reforming: Modeling and simulation for an integrated coupled for power generation system