Abstract:This paper, for the first time, reports fabricated and measured 2-layer vertically-stacked channel-all-around (CAA)-IGZO 4F 2 2T0C cells. Based on this area-efficient cell structure, an ultra-dense and robust 3D eDRAM computing-in-memory (CiM) accelerator with the local-computing scheme, consisting of stacked BEOL memory arrays, BEOL multiplexing peripherals, and FEOL local layer-wise calibration, is proposed. The highlights include: 1) first fabrication and measurement of vertically-stacked CAA-IGZO 2T0C cells, with record scaled cell size as low as 0.023 μm 2 , and long retention time up to 20s; 2) the 3D eDRAM CiM with embedded BEOL peripherals that realizes 1.54× higher maximum computing density than the counterpart with peripherals implemented in FEOL; 3) integrated LCU with data recovery function and readout calibration that reduces the impact of both inter-layer and intra-layer variations, achieving high accuracy up to 90% even with 20% relative variations and 8-layer stacking with 0.9× layer-wise performance decay. The measurement and evaluation results show that the proposed 3D eDRAM CiM achieves ultra-high memory and computing density up to 30 Mb/mm 2 /layer and 50 TOPS/mm 2 .

A 135 GBps/Gbit 0.66 Pj/bit Stacked Embedded DRAM with Multilayer Arrays by Fine Pitch Hybrid Bonding and Mini-TSV

A 1596gb/s 48gb Embedded DRAM 384-Core SoC with Hybrid Bonding Integration

A 3D Packaging Technology for 4 Gbit Stacked DRAM with 3 Gbps Data Transfer

A Customized Design Of Dram Controller For On-Chip 3d Dram Stacking

A Cross-Process Signal Integrity Analysis (CPSIA) Method and Design Optimization for Wafer-on-Wafer Stacked DRAM

High Performance Si-MoS2 Heterogeneous Embedded DRAM

Thin Memory Chip Fabrication for Multi-stack Hybrid Bonding Applications

Multiple SiGe/Si layers epitaxy and SiGe selective etching for vertically stacked DRAM

A 390-mm/sup 2/, 16-bank, 1-Gb DDR SDRAM with hybrid bitline architecture

A 3D SoC Design for H.264 Application with On-Chip DRAM Stacking

Design and process development of a stacked SRAM memory chip module with TSV interconnection

30 Mb/mm<sup>2</sup>/layer 3D eDRAM Computing-in-Memory with Embedded BEOL Peripherals and Local Layer-wise Calibration based on First-Demonstrated Vertically-stacked CAA-IGZO 4F<sup>2</sup> 2T0C Cell

First Experimental Demonstration of 3D-Stacked 2T0C DRAM Cells Based on Indium Tin Oxide Channel

Development of a Through-Stack-via Integrated SRAM Module

1-Mbit 3-D DRAM Using a Monolithically Stacked Structure of a Si CMOS and Heterogeneous IGZO FETs

A Novel 1T-DRAM Fabricated with 22 nm FD-SOI Technology

Quality Evaluation and Simulation of Through-Multilayer Tsv Integration Process for Memory Stacking

A 1 Tbit/s Bandwidth 1024 b PLL/DLL-Less eDRAM PHY Using 0.3 V 0.105 mW/Gbps Low-Swing IO for CoWoS Application

Gain Cell eDRAM Design with Stagger Hidden Refresh Scheme

A Logic-Based Embedded Dram With Novel Cell Structure And Dynamically Adaptive Refresh For Long Data Retention, Zero Data Availability Penalty And High Yield

Characterization and Mitigation of Electromigration Effects in TSV-Based Power Delivery Network Enabled 3D-Stacked DRAMs