Abstract:Based on the point of view of the thermal conduction,the erosion resistance of electrode material is related with the electrode material(conductivity σ,melting point Tm,density ρ and thermal capacity c),so the WCu alloy is chosen as material of high impulse current discharging switch.On condition that the total impulse transferred charge is 525C,the mass loss of WCu electrode is 118.10 μg/C when the transferred charge per impulse(an oscillatory impulse rectangular wave) is 10.5C,and the mass loss is 38.61 μg/C while 1.48C transferred charge per impulse(an impulse rectangular wave).So it can be derived that the mass loss of WCu material is mainly related with the impulse transferred charge(or energy) per shot for the same total impulse transferred charge.Furthermore,the surface erosion morphology of the electrode is observed and the electrode erosion mechanism is analyzed.There are many small hole or microcrack in WCu material(because of making technics),two phenomena will happen: firstly,when high impulse arcs acting on again and again,the compressing and expanding stress will act alternatively,the microcrack will be extended.Secondly,the copper and tungsten have different melting point and expansion coefficient,so the different thermal stresses will act on copper and tungsten,and a tearing force will be produced at the interface of copper and tungsten when the high impulse arcs act.In a word,the cracks on the WCu electrode surface will be formed,and one of the main cause is related to the holes and microcrack in the material when the high impulse arcs are acted on.The experimental results also prove that the degree of crack is also related with the impulse transferred charge(or energy) per shot and the total impulse transferred charge.

Investigation of WCu Electrode Erosion Morphology under Impulse Arcs