Abstract:The descaling roller is a significant component in steel rolling production. Under harsh service conditions, the descaling roller is subjected to the dynamic impact caused by high-pressure water erosion and a high-temperature billet descaling process for a long time. Under the harsh conditions of high temperature, strong wear, multi-cycle heat, force, flow, and multi-field strong coupling, the roller surface is prone to wear and corrosion failure, which affects the production cost and efficiency. Through plasma surfacing technology, a high-performance coating can be applied on the conventional metal surface to effectively improve its surface properties. It is important to carry out experimental research on the surface plasma surfacing of the descaling roller to prolong product life, improve product quality, and save cost. At present, the research on the 42CrMo scaler matrix plasma surfacing of nickel-based alloys with different WC contents is still lacking. In this paper, 70%NiCrBSi+30%WC powder and 40%NiCrBSi+60%WC powder were used as surfacing materials; plasma surfacing experiments were carried out on the 42CrMo matrix; and SEM, XRD, microhardness, friction and wear, and corrosion tests were carried out on the surfacing layer to evaluate the feasibility of preparing an ultra-high-hardness WC-particle-reinforced nickel-based alloy plasma surfacing layer on the descaling roller surface and to explore the WC hard phase dissolution behavior and complex secondary phase formation mechanism. The results show that γ(Fe/Ni), Fe-Ni, FeSi, Fe3C, and M7C3 are the main phases in the Ni/WC plasma surfacing layer. The diffusion and precipitation of elements occur in the molten pool, and complex secondary phases are formed in the surfacing layer. Compared with the 70%NiCrBSi+30%WC surfacing layer, the WC deposition phenomenon of the 40%NiCrBSi+60%WC surfacing layer has been significantly improved and has better hardness, wear resistance, and corrosion resistance. Based on the welding test, the correlation law between powder formulation, welding structure, and surfacing layer properties was revealed in this study, which lays a theoretical foundation for the preparation of high-performance coating on the descaling roller surface and has significant engineering application value and practical significance.

Cucr1 Alloy Surface Hardening Via Ultrasonic Assisted Electro-Spark Deposition

Features of Electrospark Coatings Formation on a Chromium Substrate Using Ceramic ZrSi2-MoSi2-ZrB2 and HfSi2-MoSi2-HfB2 Electrodes

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Effect of Cr and W on microstructure and wear resistance of arc additive manufactured flux-cored wire for railway wheels

Enhanced arc erosion resistance via constructing W particle network structure in cold sprayed CuCrZr–W coating: Implication for electromagnetic launching system

Multiple Needle Cathodes Plasma Surface Alloying of Ti6Al4V with W-Mo-C-N

Experimental study on aluminum bronze coating fabricated by electro-spark deposition with subsequent ultrasonic surface rolling

Preparation of Al-Cr-Fe Coatings by Heat Treatment of Electrodeposited Cr/Al Composite Coatings

Microstructure and corrosive-wear resistance of surfacing layers for underwater wet welding

Robust Ni/WC superhydrophobic surfaces by electrodeposition

Electrode Materials for Composite and Multilayer Electrospark-Deposited Coatings from Ni–Cr and WC–Co Alloys and Metals

Experimental Study on Preparation of Tungsten-Carbide-Particle-Reinforced Nickel-Based Alloy Plasma Surfacing Layer on Descaling Roller Surface

Enhancing performance of electrical discharge machining by ultrafine-grained Cu-0.5%Cr electrode

Particle Strengthening of the Surface of Copper Electrode for Electrical Discharge Machining

Accelerated Electrospark Deposition and the Wear Behavior of Coatings

Surface modification of tungsten carbide cobalt by electrical discharge coating with quarry dust powder: an optimisation study

Research on Ni-WC Coating and a Carbide Solidification Simulation Mechanism of PTAW on the Descaling Roll Surface

Electrochemical magnetorheological finishing for hard-to-machine functional materials with nanometer-scaled surface roughness

Surface modification of WC-Co alloy using Al and Si powder through WEDM: A thermal erosion process

Surface Properties of Quenched GCrl5 Steel Enhanced by Electropulsing Ultrasonic Surface Rolling Process

Effect of ultrasonic surface rolling process on the surface properties of CuCr alloy