Abstract:Electrochemical discharge machining (ECDM) is an emerging method for developing micro-channels in conductive or non-conductive materials. In order to machine the materials, it uses a combination of chemical and thermal energy. The tool electrode’s arrangement is crucial for channeling these energies from the tool electrode to the work material. As a consequence, tool electrode optimization and analysis are crucial for efficiently utilizing energies during ECDM and ensuring machining accuracy. The main motive of this study is to experimentally investigate the influence of different electrode materials, namely titanium alloy (TC4), stainless steel (SS304), brass, and copper–tungsten (CuW) alloys (W70Cu30, W80Cu20, W90Cu10), on electrodes’ electrical properties, and to select an appropriate electrode in the ECDM process. The material removal rate (MRR), electrode wear ratio (EWR), overcut (OC), and surface defects are the measurements considered. The electrical conductivity and thermal conductivity of electrodes have been identified as analytical issues for optimal machining efficiency. Moreover, electrical conductivity has been shown to influence the MRR, whereas thermal conductivity has a greater impact on the EWR, as characterized by TC4, SS304, brass, and W80Cu20 electrodes. After that, comparison experiments with three CuW electrodes (W70Cu30, W80Cu20, and W90Cu10) are carried out, with the W70Cu30 electrode appearing to be the best in terms of the ECDM process. After reviewing the research outcomes, it was determined that the W70Cu30 electrode fits best in the ECDM process, with a 70 μg/s MRR, 8.1% EWR, and 0.05 mm OC. Therefore, the W70Cu30 electrode is discovered to have the best operational efficiency and productivity with performance measures in ECDM out of the six electrodes.

Enhancing performance of electrical discharge machining by ultrafine-grained Cu-0.5%Cr electrode

Thermo-Mechanical Treatment for Reducing the Wear Rate of CuCrZr Tool Electrodes during Electro-Discharge Machining

Influence of Different Tool Electrode Materials on Electrochemical Discharge Machining Performances

Performance and Microstructure of TiN/Cu EDM Electrodes

Particle Strengthening of the Surface of Copper Electrode for Electrical Discharge Machining

Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders

Performance and surface alloying characteristics of Cu–Cr and Cu–Mo powder metal tool electrodes in electrical discharge machining

A Sustainable Machining Method with High Efficiency, High Quality and Low Wear - Electric Arc Electrochemical Composite Machining

Effects of electrolytic copper and copper alloy electrodes on machining performance in electrical discharge machining (EDM)

Micro-Grinding of Electrochemically Pretreated Ultra-high-Chromium Steel

Optimizing micro-EDM with carbon-coated electrodes: A multi-criteria approach

Enhancing Surface Integrity in Micro-EDM of Ti-6Al-4V Alloy Adopting Two-Dimensional Ultrasonic Circular Vibration (UCV) Electrode

Improving Micro-EDM Machining Efficiency for Titanium Alloy Fabrication with Advanced Coated Electrodes

Experimental Research on Machining Performance of Electrode Materials in Dry Edm

Performance Analysis and Optimization of Different Electrode Materials and Dielectric Fluids on Machining of High Carbon High Chromium Steel in Electrical Discharge Machining

Study of electrode feeding method for EDM hollowing

Effects of non-electrical parameters on the characteristics of discharge craters and machining performance in short electrical arc milling

Ultra-high-speed combined machining of electrical discharge machining and arc machining

Research on ultrasonic vibration–assisted electrical discharge machining SiCp/Al composite

Electrical discharge machining of Ti6Al4V with a bundled electrode

A New Wire Electrode for Improving the Machining Characteristics of High-Volume Fraction SiCp/Al Composite in WEDM