Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. The machinability of 2.5D C/SiC composites is severely limited by their inherent brittleness, inhomogeneity, and anisotropy. Conventional machining techniques are often associated with several drawbacks, including elevated costs, significant tool deterioration, and suboptimal efficiency. In contrast, short electric arc milling (SEAM) emerges as a promising innovation in the field of specialized machining, serving as a crucial technical approach for the effective processing of conductive materials that pose machining challenges. This work explores the surface quality law after short arc machining of 2.5D C/SiC composites under different process parameters and investigates etching damage incurred. To assess the influence of different parameters on the surface quality post-machining, two evaluation indices were established: surface roughness (Sa) and the thickness of the heat-affected layer (HAL). A one-factor test was set up to analyze the voltage and current waveforms, the electron microscopy images of the processed surface, Raman spectra, and the surface energy spectrum, using Sa, HAL, and the microscopic morphology as the detection indices. Moreover, the study demonstrates that the arc discharge energy and the discharge frequency exert considerable influences on the quality of the machined surface. Both the Sa and HAL values increase with higher voltage and duty cycle, while they decrease with rising frequency and electrode rotation speed. Consequently, the surface quality can be enhanced by lowering the voltage and duty cycle and by increasing the frequency and electrode rotation speed. Notably, short arc machining leads to a high-temperature oxidation reaction, primarily producing SiO2, which serves to prevent further oxidation of the material. However, the process also results in microscopic defects, such as fiber breakage and fiber pull-out. These findings offer both theoretical and experimental foundations for the future realization of high-efficiency and high-quality processing of 2.5D C/SiC composites via SEAM.

Effects of non-electrical parameters on the characteristics of discharge craters and machining performance in short electrical arc milling

Effect of short electric arc milling discharge machining on the processing performance of two-dimensional C/SiC composites

Milling performance of Ti2AlNb by DC short electric arc machining based on different electrode materials

A highly energy-efficient milling of Inconel 718 via modulated short electric arc machining

Experimental Study and Parameter Optimization on Sustainable and Efficient Machining GH4169 with Rotating Short Arc Milling Method

Experimental study on high-efficiency DC short electric arc milling of titanium alloy Ti6Al4V

Experimental investigation on Ti2AlNb in high-efficiency short electric arc milling

Milling performance of titanium alloy based on short electric arc machining with direct current power source

Study of ablation behavior on 2.5-dimensional C/SiC composites processed via short electric arc milling with various parameters

Machining Mechanisms and Characteristics of Moving Electric Arcs in High-Speed EDM Milling

Experiment investigation on machining characteristics of 7075 aluminium alloy with short electric arc milling

Influence of Different Dielectrics and Machining Parameters for Electrical Discharge-Assisted Milling of Titanium Alloy

A hybrid short electric arc and electrochemical machining of the Ti6Al4V alloy

High-efficiency DC-SEAM for aerospace materials with Joule-arc heat transition and ignition mechanism

Electrical discharge machining of semiconductor materials: A review

Research on Machining Ti6Al4V by High-Speed Electric Arc Milling with Breaking Arcs Via Mechanical-Hydrodynamic Coupling Forces

Experimental investigation of rotary sinking electrochemical discharge milling with high-conductivity salt solution and non-pulsed direct current

Study on the Characteristics of Plasma Channel Based on Multi-Spark Pulse Discharge Machining Effect

Influence of Different Tool Electrode Materials on Electrochemical Discharge Machining Performances

Sustainable and Efficient Processing of Gh4169 Superalloy with Rotating Short Arc Milling Method

High-speed EDM Milling with Moving Electric Arcs