Abstract:Heterogeneous W-steel joining components will produce brittle intermetallic compounds (IMCs) and significant residual stress in the interface. Adding a Cu interlayer serves as an effective solution. Nevertheless, the strengthening of W-Cu-steel joints is restricted because W-Cu and Cu-steel are members of binary immiscible and finite solid solution systems. Thus, accomplishing interface alloying by overcoming the positive generating energy of insoluble systems and opening up interatomic diffusion channels is a crucial issue to be addressed. In this work, casting and brazing technologies were incorporated into bonding W-Cu-steel to provide a high temperature field, as well as the dissolving and wetting of Cu-based liquid phase to refractory W. It is shown that the superior tensile strength of the W/Cu castings-steel brazed joints (similar to 264 MPa) was achieved, and the joint survived 1000 cycles of thermal fatigue under 1 MW/m(2). To assess the effects of brazing and casting on the W-Cu-steel joint, a detailed analysis was conducted on the mechanism of atomic diffusion in the joint interface. It is considered that in W-Cu joining, casting provided a higher thermodynamic driving force than brazing, thus achieving better interatomic diffusion and a wider microalloying region. Cu-steel joining achieved good alloying and forming dendritic extensions by intergranular diffusion. Based on the process optimization results, the feasibility of preparing the U-shaped first wall (FW) mock-up with W armor using brazing technology was verified. This study provides a new technological path, offering a major design and manufacturing guide for plasma facing components (PFCs).

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

Study on the Microstructure and Properties Evolution of CuCrZr/316LN-IG Explosion Bonding for ITER First Wall Components

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Effect of the Iter Fw Manufacturing Process on the Microstructure and Properties of A Cucrzr Alloy

Thermal fatigue failure behavior on Be/Cu joint of ITER first wall after enhanced heat flux test

HIGH HEAT LOAD PROPERTIES OF W/Cu FUNCTIONALLY GRADED MATERIALS

Effect of explosive welding on properties of lTER-grade CuCrZr alloy

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Design and Thermal Shock Performance of W/Cu Functionally Graded Material used as Plasma Facing Component

Bonding Tungsten, W–Cu-alloy and Copper with Amorphous Fe–W Alloy Transition

Improving the Interface Strength and Fatigue Property of W-Cu-steel Brazed Joint Via Induced Interface Alloying

Comprehensive Enhancement of the Mechanical and Thermo-Mechanical Properties of W/Cu Joints Via Femtosecond Laser Fabricated Micro/nano Interface Structures

Development of High Impact Toughness Cu/ODS-Cu Joints Using HIP Bonding Process for the Preparation of W/Cu/ODS-Cu Monoblock Divertor

Femtosecond Laser Fabricated Micro/nano Interface Structures Toward Enhanced Bonding Strength and Heat Transfer Capability of W/Cu Joining

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Study on the effect of vacuum fusion infiltration technology on the properties of tungsten/copper joining interface

A method for high heat flux fatigue test of W/Cu/steel small mock-up using normal cooling conditions

Novel low temperature derived W f /W-ZrC-Cu composites by reactive infiltration with enhanced mechanical and thermal physical properties