Development and manufacturing of Beryllium-armoring ITER enhanced heat flux FW towards series production in China
Jiming Chen,Pinghuai Wang,Yi Zhou,Qian Li,Jialin Li,Jing Wu,Juan Du,Bo Yang,Xiaobo Zhu,Hui Gao,Dan Hu,Yanyu Chen,Quanming Wang,Zhonghua Liu,Kun Wang,Sheng Liu,Liman Bao,Ryan Hunt
DOI: https://doi.org/10.1088/1741-4326/ad5b04
IF: 3.3
2024-06-25
Nuclear Fusion
Abstract:ITER Enhanced heat flux (EHF) first wall (FW) provides thermal shielding to other components behind and to limit its plasma boundary, consequently bearing high surface heat load up to 4.7 MW/m2. China developed the EHF FW technologies in a steady steps by making small mock-ups, semi-prototypes and a full-scale prototype (FSP) towards series production in Southwestern Institute of Physics. All key technologies for bimetallic diffusion bonding, welding and assembling have been fully qualified. The Be armor tile size effect on thermal fatigue performance has been evaluated by pulsed high heat flux test with an EMS-400 electron beam facility. It was found that both the Be/CuCrZr bonding and its thermal fatigue life is highly dependent on the tile size, and 12×12 mm2 Be tiles are acceptable for the requiring performance, either in individual ones or in castellation by cutting larger ones. Small scale mock-ups with such Be tiles survived from 16,000 thermal cycles at 4.7 MW/m2 while EHF FW fingers with 16×16 mm2 Be tiles demonstrated unstable performance. In contrast, only larger Be tiles than 24×12 mm2 showed reliable diffusion bonding with CuCrZr heat sink by hot isostatic pressing (HIP) and consequently should be castellated into smaller ones. The manufacturing of the FSP finger goes through complex thermal cycles, using CuCrZr alloys in age-strengthening plus cold-rolling state enable to keep its tensile strength in the level of 285 MPa and mean grain size less than 100μm. The pipe welding for fingers pairing and their assembly with the central beam are demonstrated, including twice welding for repairing in narrow space. The FSP showed good fingers alignment, dimensional control and reliable vacuum tightness without any blockage of cooling channels.
physics, fluids & plasmas