Abstract:Chemical vapor deposition (CVD) is a promising technique for the preparation of W-based plasma-facing materials (PFMs). An overview of the microstructure, chemical composition, thermal conductivity, thermal stability, thermal shock performance under disruption-like and edge localized mode-like transient heat load, and neutron irradiation performance of CVD-W has been given in our previous work. However, for fusion applications, additional properties need to be assessed. To this end, deuterium (D) permeability, D plasma irradiation performance, and thermal fatigue resistance of CVD-W were investigated in this work. The results showed that the D permeability of CVD-W in the temperature range of 973–1173 K was larger than that of the commercial pure W, which was related to the columnar grain structure of CVD-W. Additionally, both CVD-W and commercial pure W were exposed to D plasma up to a fluence of 1 × 1026 m−2. Compared to commercial pure W, CVD-W exhibited a mitigated blistering behavior and lower D total retention, which could be attributed to its strong [001] crystallographic texture along the thickness direction and a lower number of defect density (e.g. grain boundaries). CVD-W and commercial pure W were also exposed to steady-state and transient heat load simultaneously, leading to a base surface temperature and surface temperature increase of about 953–1473 K and 250–300 K, respectively. A strong grain orientation dependence of the surface degradation induced by the combined heat load has been found. Consequently, CVD-W exhibited a much more uniform plastic deformation than pure W, and no surface cracks along grain boundaries were observed in CVD-W. Finally, the industrial-scale production of CVD-W-based PFMs and mockups was demonstrated. This work paves the way for the fusion applications of thick CVD-W coatings.

Design and Thermal Shock Performance of W/Cu Functionally Graded Material used as Plasma Facing Component

HIGH HEAT LOAD PROPERTIES OF W/Cu FUNCTIONALLY GRADED MATERIALS

Tungsten Joining with Copper Alloy and Its High Heat Load Performance

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Thermal shock behavior of W/Cu functionally gradient material

High Heat Flux Testing of B4C/Cu and SiC/Cu Functionally Graded Materials Simulated by Laser and Electron Beam

Fabrication and microstructure of W/Cu functionally graded material

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Study on the Microstructure and Properties Evolution of CuCrZr/316LN-IG Explosion Bonding for ITER First Wall Components

Plasma Facing Component with Built-in Tungsten Wires and a W-Cu Functionally Graded Layer: A Finite Element Assessment

Thermal Stress Reduction in a W/Cu Functionally Graded Material Used As a Divertor Component

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Experimental and Numerical Simulations of ELM-like Transient Damage Behaviors to Different Grade Tungsten and Tungsten Alloys

Optimum design of W/Cu functionally graded material for thermal stress mitigation

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Multi-factor coupled failure mechanism of W–Cu functionally graded material under thermal shock service

Fabrication and evaluation of SiC/Cu functionally graded material used for plasma facing components in a fusion reactor

New Progress of Metal-Based Functionally Graded Plasma-Facing Materials in China

Recent Studies of Tungsten-Based Plasma-Facing Materials in the Linear Plasma Device STEP

Recent progress of thick tungsten coating prepared by chemical vapor deposition as the plasma-facing material