Abstract:Recently, iron powder has been proposed as a high energy density, easily storable, and CO2-free energy carrier. During the iron combustion, thermal energy is released as heat. The combusted products, the iron oxide particles, are captured and cyclically reduced back into iron powder in a process that is powered by renewable energy. Each combustion step, followed by a reduction, constitutes one cycle in the process. Previous studies predominantly focused on the reduction and combustion as individual steps. This work investigates the impact of cyclic combustion-reduction on material properties, with the specific focus on the reduction of iron oxides using hydrogen under fluidisation conditions. The powder is combusted and reduced for 3 cycles under the same conditions. Afterwards the properties of the powder and the reaction conversion are characterized. The physical techniques used for size and shape analysis include laser diffraction particle size analysis and scanning electron microscopy (SEM). For structure and chemistry, X-ray diffraction (XRD) and energy dispersive X-ray (EDX) analysis are also employed. To study the effect of the reduction conditions on the cycle and on the material properties of the powder, different experiments are conducted using 550 and 575°C as reduction temperatures. The higher conversion is observed at 575°C . During the first combustion particles resulted in large agglomerates and required a manual grinding step before being sent to the next reduction. However, the particle size distribution remains relatively stable in all subsequent cycles. The results suggest that the powder can be effectively utilized in the iron fuel cycle without requiring additional intermediate treatments, such as grinding and sieving after each cycle. This aspect highlights the potential feasibility and simplicity of implementing the cyclic combustion-reduction process for practical applications of iron powder as an energy carrier.

Effect of High Temperature Reduction Process on Compressibility of Water-Atomized Iron Powder

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Preparation of Metallized Pellets for Steelmaking by Hydrogen Cooling Reduction with Different Cooling Rates

Studies on the Reduction Behavior of Iron Oxide Pellet Fines with Hydrogen Gas: Mechanism and Kinetic Analysis

On the Recycling of Water Atomized Powder and the Effects on Properties of L-PBF Processed 4130 Low-Alloy Steel

Hydrogen-based direct reduction of combusted iron powder: deep pre-oxidation, reduction kinetics and microstructural analysis

Effect of iron on the sinterability and properties of HA/Ti-Fe composites

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

Effect of reduction rate on microstructure and properties of laminated steel/aluminium low density composites prepared by hot pressing

Experimental and Numerical Simulation Study on Reduction of Pellets Based on X-ray Micro-computed Tomography

Improvement on fluidization and reduction of ultrafine CuO powders with the assistance of iron microspheres

Influence of Powder Oxidation on Powder Properties and Formability in H13 Hot-Work Steels Processed by Electron Beam Melting

Effect of hot stamping and quenching & partitioning process on microstructure and mechanical properties of ultra-high strength steel

Investigation of (H2–H2O) partial pressure on the gas-based reduction of fine iron ore in mixed gases (H2–H2O–CO–CO2–N2)

Cyclic reduction of combusted iron powder: A study on the material properties and conversion reaction in the iron fuel cycle

Influence of Phosphorization Process and Heat Treatment on the Magnetic Properties of Pure Iron Soft Magnetic Composite Materials

Direct reduction swelling behavior of pellets in hydrogen-based shaft furnaces under typical atmospheres

Effect of different modification methods on fluidized bed hydrogen reduction of cohesive iron ore fines

Effect of carbon on isothermal reduction of high-strength steel oxide scale in 30%H2–N2 atmosphere

Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

Mineralogical Aspects of Reducing Lump Iron Ore, Pellets, and Sinter with Hydrogen