Abstract:Precipitation strengthening has been widely adopted in austenitic low-density steel owing to excellent hardened effects. This approach generally employs the coherent kappa' -carbides and non-coherent B2 particles. Revealing the precipitation transformation pathway is decisive for further optimizing the microstructures under specific engineering applications. Herein, the detailed precipitation sequence of Fe-28Mn-11Al-1C-5Ni (wt%) austenitic low-density steel as well as its influence on mechanical properties during aging process is systematically investigated. Our results reveal that nano-sized kappa' -carbides domains (2 nm) exist in the solution-treated specimen. During aging at 500 degree celsius for 1 h, the cuboidal kappa' -carbides (15-20 nm) uniformly disperse in austenite matrix. However, after aging at 700 degree celsius for 15 min, the coarsen kappa' -carbides (30-35 nm) inhomogeneously distribute and align preferentially along the ( 1 0 0 ) directions. Further, extending the aging time to 60 min, the needle-type B2 particles replace the kappa' -carbides due to the enrichment of Ni elements at the phase boundaries among the austenite and kappa' carbides. After aging at 900 degree celsius, kappa' -carbides entirely dissolve into the austenite matrix, and the intragranular B2 particles are the sole precipitates in the austenite matrix and follow the K-S orientation relationship with austenite. The work hardening capability seriously deteriorates due to the shearing of kappa' -carbides by gliding dislocations. While the intragranular B2 particles preserve excellent work hardening rate by dislocations bow-out mechanism. The present work is meaningful for guiding the design of new generation dual-nano precipitation austenitic lightweight steel.(c) 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Effect of Interstitial Solutes on Precipitation Behavior of 9–12% Chromium Ferritic Steels

Influences of Partial Substitution of C by N on the Microstructure and Mechanical Properties of 9cr18mo Martensitic Stainless Steel

Effect of nitrogen content on microstructure, mechanical properties, and corrosion behaviour of coarse-grained heat-affected zone of nitrogen-containing austenitic stainless steel

Stabilities of the precipitates in CLAM steel during 30,000 h thermal aging

Effects of Heat Treatment and Aging on Microstructural and Mechanical Properties of RAFM Steel

The Effect of Aging Heat Treatment on the Microstructure and Mechanical Properties of 10cr20ni25mo1.5nbn Austenitic Steel

Effect of Increased N Content on Microstructure and Tensile Properties of Low-C V-microalloyed Steels

Effect of aging temperature on the austenite reversion and mechanical properties of a Fe–10Cr–10Ni cryogenic maraging steel

Microstructural Characteristics and Impact Fracture Behaviors of Low-Carbon Vanadium-Microalloyed Steel with Different Nitrogen Contents

Interpretation of microstructure evolution and mechanical properties under aging treatments of a Fe–24Mn-0.6C–2Al-0.6V austenitic steel for cryogenic application

Effect of long-term aging on the low cycle fatigue behavior and microstructure of a 10% Cr martensitic steel with low nitrogen and high boron contents at 650 °C

The Effect of Microstructure Evolution on the Mechanical Properties of Martensite Ferritic Steel During Long-Term Aging

Effect of Thermal Deformation on Microhardness and Structure of High Nitrogen Austenite Stainless Steel Mn18Cr18N

Effect of High-Temperature Ageing on Microstructure and Mechanical Properties of Linear Friction Welded S31042 Steel Joint

Microstructure and Characterization of High Hardness Produced in High-Nitrogen Austenite Intermediate Temperature Transformation

Effect of Thermal Aging on Microstructural Evolution in Ferrite of Duplex Stainless Steel in Nuclear Power Plant Applications

Influence of Grain Boundary Carbides on Mechanical Properties of High Nitrogen Austenitic Stainless Steel

Precipitation Transformation Pathway and Mechanical Behavior of Nanoprecipitation Strengthened Fe–Mn–Al–C–Ni Austenitic Low-Density Steel

Improving High Temperature Creep Resistance of Reduced Activation Steels by Addition of Nitrogen and Intermediate Heat Treatment

Effect of nitrogen on microstructure and secondary hardening of H21 die steel