Abstract:The quality and characteristics of a powder in powder bed fusion processes play a vital role in the quality of additively manufactured components. Its characteristics may influence the process in various ways. This paper presents an investigation highlighting the influence of powder deterioration on the stability of a molten pool in a laser beam powder bed fusion (LB-PBF, selective laser melting) process and its consequences to the physical properties of the alloy, porosity of 3D-printed components and their mechanical properties. The intention in this was to understand powder reuse as a factor playing a role in the formation of porosity in 3D-printed components. Ti6Al4V (15 μm-45 μm) was used as a base material in the form of a fresh powder and a degraded one (reused 12 times). Alloy degradation is described by possible changes in the shape of particles, particle size distribution, chemical composition, surface tension, density and viscosity of the melt. An approach of 3D printing singular lines was applied in order to study the behavior of a molten pool at varying powder bed depths. Single-track cross-sections (STCSs) were described with shape parameters and compared. Furthermore, the influence of the molten pool stability on the final density and mechanical properties of a material was discussed. Electromagnetic levitation (EML) was used to measure surface tension and the density of the melt using pieces of printed samples. It was found that the powder degradation influences the mechanical properties of a printed material by destabilizing the pool of molten metal during printing operation by facilitating the axial flow on the melt along the melt track axis. Additionally, the observed axial flow was found to facilitate a localized lack of fusion between concurrent layers. It was also found that the surface tension and density of the melt are only impacted marginally or not at all by increased oxygen content, yet a difference in the temperature dependence of the surface tension was observed.

Influence of Powder Oxidation on Powder Properties and Formability in H13 Hot-Work Steels Processed by Electron Beam Melting

Effects of Oxidized Metal Powders on Pore Defects in Powder-Fed Direct Energy Deposition

Elucidating the Impact of Severe Oxidation on the Powder Properties and Laser Melting Behaviors

Residual oxygen content and powder recycling: effects on microstructure and mechanical properties of additively manufactured Ti-6Al-4V parts

Influence of Oxygen Content on the Microstructure and Mechanical Properties of Hot Isostatically Pressed 30CrMnSiNi2A Ultra-High Strength Steel

Influence of oxygen content on melt pool dynamics in metal additive manufacturing: High-fidelity modeling with experimental validation

Powder Reuse in Electron Beam Melting Additive Manufacturing of Ti6Al4V: Particle Microstructure, Oxygen Content and Mechanical Properties

In situ monitoring the effects of Ti6Al4V powder oxidation during laser powder bed fusion additive manufacturing

Effect of Oxide Particles on Microstructure and Mechanical Properties of the 45 Carbon Structural Steel

Regulating Oxides Enhances the Mechanical Properties of Additively Manufactured Martensitic Stainless Steel

On the nanoscale oxide dispersion via in-situ atmospheric oxidation during laser powder bed fusion

Improved passivation effect of additively manufactured WE43 porous scaffolds treated by high temperature oxidation in pure oxygen atmosphere

Reuse of Ti6Al4V Powder and Its Impact on Surface Tension, Melt Pool Behavior and Mechanical Properties of Additively Manufactured Components

Effects of process atmosphere on additively manufactured FeCrAl oxide dispersion strengthened steel: Printability, microstructure and tensile properties

Improvement of mechanical properties through inhibition of oxidation by adding TiC particles in laser aided additive manufacturing of stainless steel 316L

Oxidation behavior of low-cost CP-Ti powders for additive manufacturing via fluidization

Effect of Powder Oxidation on the Anisotropy in Tensile Mechanical Properties of Bulk Al Samples Fabricated by Spark Plasma Sintering

Oxygen variation in titanium powder and metal injection molding

Enhancement of Spreadability in Haynes 230 Powder Via in Situ Micro-Oxidation Gas Atomization for Additive Manufacturing Process

The effects of powder reuse on the mechanical response of electron beam additively manufactured Ti6Al4V parts

Effects of Oxygen Content on Microstructure and Mechanical Properties of 18ni300 Maraging Steel Manufactured by Laser Directed Energy Deposition