Abstract:Titanium is a highly valued material. Developing a lower-cost titanium (Ti) metal powder production process, potentially substituting the conventional Kroll-HDH method, has challenged the titanium community for decades. The ease of aluminum forming alloys with titanium and the strong chemical affinity of titanium to oxygen rule out the possibility of fabricating pure Ti metal directly by aluminum reduction of TiO2. Based on the demonstrated enhanced deoxidation of Ti using Mg metal, this paper proposes an Al–Mg combined stepwise reduction of TiO2 to fabricate Ti metal powder. Critical challenges overcome in this research include predicting reaction thermodynamics and preparing Ti2O intermediate by Al reduction of TiO2 without significant Al alloying, which is made possible by forming mild-acid soluble Ca12Al14O32Cl2 byproduct. Various Al reduction conditions were investigated and optimized. To the best of our knowledge, it is the first report to fabricate Ti2O powder by Al reduction of TiO2 with a highly stable chemical composition. The difficulty of sintering the Ti2O intermediate before Mg deoxidation to reduce the surface oxygen contribution is mitigated by mixing a certain amount of low-oxygen titanium powder with the Ti2O powder. This allows the densification temperature to be lowered from 1400 °C for sintering pure Ti2O powder to 1100 °C. Even with as much as around 15 wt% oxygen, the sintered powder can be effectively deoxidized by Mg with the help of hydrogen. A titanium metal powder with an oxygen content of 0.134 wt%, an Al content of 0.123 wt%, and other impurities meeting the standard of pure titanium metal powder (GB/T 34486-2017 FTA1) is successfully prepared by the Al reduction-Mg deoxidation combined process. It is a promising alternative for producing titanium metal powder and its derivatives.

Oxidation behavior of low-cost CP-Ti powders for additive manufacturing via fluidization

Oxidation behavior of in situ TiCp/Ti6Al4V composite with self-assembled network microstructure fabricated by reaction hot pressing

Oxygen variation in titanium powder and metal injection molding

Passivation coating on titanium powder surface via SnCl4-Ti gas–solid fluidization reaction

Influence of Powder Oxidation on Powder Properties and Formability in H13 Hot-Work Steels Processed by Electron Beam Melting

Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air

Deoxidation thermodynamics of Ti–O in hydrogen atmosphere: Preparation of TiH2 alloy powder by direct reduction of spent V2O5–WO3/TiO2 catalyst with magnesiothermic

Self-assembly of a Highly Stable and Active Co3O4/H-TiO2 Bulk Heterojunction with High-Energy Interfacial Structures for Low Temperature CO Catalytic Oxidation

Achieving synergy of strength and ductility in powder metallurgy commercially pure titanium by a unique oxygen scavenger

Precision control of oxygen content in CP-Ti for ultra-high strength through titanium oxide decomposition: an in-situ study

Low-oxygen Ti-6Al-4V alloy powder synthesized by an aluminothermic reduction combined with deoxidation process

Deposition Mechanisms and Oxidation Behaviors of Ti-Ni Coatings Deposited in Low-Temperature HVOF Spraying Process

Oxygen Uptake of Ti6Al4V during Direct Metal Deposition Process

Towards an atomic-scale understanding of oxide film in the Ti powder surface

Cost-affordable Ti-6Al-4V for Additive Manufacturing: Powder Modification, Compositional Modulation and Laser In-Situ Alloying

Precise control of oxygen for titanium-zirconium-molybdenum alloy

Precise fabrication of Ti2O from TiO2 by Al reduction towards potentially lower-cost Ti metal powder production

Oxidation Kinetics and Mechanism of TiC with Simulated Blast‐Furnace Gases

In situ monitoring the effects of Ti6Al4V powder oxidation during laser powder bed fusion additive manufacturing

Investigating phase transformation, densification and diffusion mechanism of TiH 2 powder to achieve a high ductile Ti6Al4V alloy

Improvement of mechanical properties through inhibition of oxidation by adding TiC particles in laser aided additive manufacturing of stainless steel 316L