Abstract:The external insulation strength of the power equipment sleeve in the substation and converter station will be reduced with the increase in altitude and atmosphere pollution. The weakness of external insulation seriously threatens the safe operation of electrical equipment. At present, there are few studies and conclusions that focus on the flashover characteristics of power equipment bushing in high-altitude polluted areas. Therefore, this paper takes the 220 kV voltage level bushing as the research object and studies the Alternating Current (AC) pollution flashover characteristics and lightning and switching impulse flashover characteristics at low pressure. The insulation configuration at high-altitude polluted areas is analyzed. Finally, the insulation configuration scheme, which is suitable for high-altitude polluted areas, is proposed. The results show that the AC pollution flashover voltages of the bushing decrease with the decrease in the atmospheric pressure and the increase in the salt density as a power exponent function. The impulse flashover voltages also decrease with the decrease in the atmospheric pressure as a power exponent function. The atmospheric pressure/pollution impact characteristic index is related to the type of voltage, the value of the atmospheric pressure, and the value of the salt density. The test bushing does not meet the insulation configuration requirements in some high-altitude polluted areas. Through the analysis and calculation of the test results, the bushing insulation configuration scheme in high-altitude polluted areas is proposed. The research results can provide a reference for the external insulation design of bushings in substations and converter stations in high-altitude polluted areas.

Study on External Insulation Characteristics Across Open Contacts of ±800 kV DC High Speed Switch

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

Investigation of Surface Charge Accumulation Characteristics of Insulators in HSS

Study of the Switching Arc Characteristics in a HVDC High Speed Switch

DC switching overvoltage of ± 1100 kV UHVDC converter station

Insulation Coordination of UHVDC Transmission Line

On the DC Transient Overvoltage in the Converter Stations of ±800 Kv Xiluodu Zhexi HVDC Project

Study on Switching Over-voltage and Its Restrictions in UHVAC System

Study on reliability improvement of current-transferring type HVDC circuit breaker

Comparison of Insulation Coordination Between ±800kv and ±1100kv UHVDC Systems

Study of the Long-Time Arcing Characteristics of SF6 in a ±800KV High Speed Switch

Analysis of the characteristics of gas insulated, multiple-stage, high voltage switches

Insulation structure design and electric field simulation of 500 kV isolation energy supply transformer for HVDC breaker

Research on Insulation Configuration of 220 kV Bushing in High-Altitude Polluted Areas

Report on the Research Progress of the Project on the Breakdown Mechanism of Insulation System of EHVDC Equipment Under Complex Electric Field

Study on Internal Electric Field Simulation Analysis and Local Optimization Strategies of High Voltage Metal Enclosed Switchgear

Research on the Overheating Fault of HVDC Wall Bushing and Its Dignosis Strategies Based on CFD

Study on Electric Field Distribution and Switching Impulse Discharge Characteristics of ±1100kv Dry-Type Smoothing Reactor

Three-Dimensional Modeling and Optimization Analysis of Internal Electric Field in 40.5 Kv Switchgear

Dielectric Characteristics of the ±1100kV UHVDC Wall Bushing with SF6 Gas Insulation

Analysis of Fault Arc in High-Speed Switch Applied in Hybrid Circuit Breaker