Abstract:The processing of pure copper (Cu) has been a challenge for laser-based additive manufacturing for many years since copper powders have a high reflectivity of up to 83% of electromagnetic radiation at a wavelength of 1070 nm. In this study, Cu particles were coated with sub-micrometer tungsten (W) particles to increase the laser beam absorptivity. The coated powders were processed by powder bed fusion-laser beam for metals (PBF-LB/M) with a conventional laser system of <300 watts laser power and a wavelength of 1070 nm. Two different powder manufacturing routes were developed. The first manufacturing route was gas atomization combined with a milling process by a planetary mill. The second manufacturing method was gas atomization with particle co-injection, where a separate W particle jet was sprayed into the atomized Cu jet. As part of the investigations, an extensive characterization of powder and additively manufactured test specimens was carried out. The specimens of Cu/W powders manufactured by the milling process have shown superior results. The laser absorptivity of the Cu/W powder was increased from 22.5% (pure Cu powder) to up to 71.6% for powders with 3 vol% W. In addition, a relative density of test specimens up to 98.2% (optically) and 95.6% (Archimedes) was reached. Furthermore, thermal conductivity was measured by laser flash analysis (LFA) and thermo-optical measurement (TOM). By using eddy current measurement, the electrical conductivity was analyzed. In comparison to the Cu reference, a thermal conductivity of 88.9% and an electrical conductivity of 85.8% were determined. Moreover, the Vickers hardness was measured. The effect of porosity on conductivity properties and hardness was investigated and showed a linear correlation. Finally, a demonstrator was built in which a wall thickness of down to 200 µm was achieved. This demonstrates that the Cu/W composite can be used for heat exchangers, heat sinks, and coils.

Light Absorption of W-Cu Powders in Laser Powder Bed Fusion

Laser Powder Bed Fusion of Copper-Tungsten Powders Manufactured by Milling or Co-Injection Atomization Process

Characterization of laser-powder interaction and particle transport phenomena during laser direct deposition of W‒Cu composite

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Understanding of process and material behaviours in additive manufacturing of Invar36/Cu10Sn multiple material components via laser-based powder bed fusion

Coupled Computational Fluid Dynamics-Discrete Element Method Model for Investigation of Powder Effects in Nonconventional Laser Powder Bed Fusion Process

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

Mesoscopic simulation of surface morphology and thermodynamic mechanism during laser powder-bed fusing Ni-based composite: Underlying role of WC weight fraction

High Reflectivity and Thermal Conductivity Ag–Cu Multi-Material Structures Fabricated via Laser Powder Bed Fusion: Formation Mechanisms, Interfacial Characteristics, and Molten Pool Behavior

Particle-based modelling of laser powder bed fusion of metals with emphasis on the melting mode transition

Mesoscopic simulation of overlapping behavior in laser powder bed additive manufacturing

An integrated methodology for estimating the interface temperature and effects of powder diameters in laser transmission welding process

Intentional Oxidation and Laser Remelting of Highly Reflective Pure Cu for Its High‐Quality Additive Manufacturing

Determining the laser absorptivity of Ti-6Al-4V during laser powder bed fusion by calibrated melt pool simulation

Modeling of Laser Power Attenuation by Powder Particles for Laser Solid Forming

Effects of Powder-Mixing Homogeneity and W-Powder Morphology on Forming Quality in Laser Direct Forming of W-Cu Composites

Numerical simulation and experimental study of femtosecond laser ablation of copper: A two-temperature model with temperature-dependent properties and multiple phase transitions

Laser shock dynamic compaction of aluminum–copper (Al–Cu) composite metal powder

Composition design method of Al-Cu alloy for laser powder bed fusion

Laser powder bed fusion of electrically/thermally conductive component by developing inert Cr 2 O 3 -coated Cu powder

Simulation and Experimental Investigation on Additive Manufacturing of Highly Dense Pure Tungsten by Laser Powder Bed Fusion