Abstract:Laser powder bed fusion (LPBF), also called selective laser melting, is an additive manufacturing technology with great potential for creating three-dimensional metallic components with intricate designs. The application of dynamic thermal cycles involving melting and cooling makes it difficult to maintain the desired surface quality and shape in the LPBF process. The LPBF process's dynamic stability of the melt pool is essential to ascertain due to its influence on the quality of the manufactured products. Examining the thermal behavior and temperature distribution inside the melt pool is necessary. Subsequent to experimental validation, employing a finite element model (FEM) has the potential to accurately define thermal distributions and the dimensions of the melt pool. A three-dimensional transient model based on a moving Gaussian heat source was employed in this study to examine the influence of process variables (i.e., scan velocity, laser power, laser beam radius, hatch spacing, number of layers, and scan angle for each layer) on the melt pool shape in LPBF of SS316L powder. A finite element model based on three-dimensional parameters was proposed to evaluate the temperature gradient and melt pool characteristics of SS316L when subjected to laser powder bed fusion. The method takes into account the effect of the laser penetration depth on the characteristics of the molten pool, determined by a multiple-layer (15) and multiple-track (6) finite element model with variable process parameters, such as laser power, scanning speed, beam radius and hatch spacing. Experimental data obtained from the literature were used to calibrate the proposed heat source model, and the adjusted finite element model was then validated through further experiments. The modeling results showed concordance with the experimental data. The effects of the interlayer and intertrack were examined. Temperature distributions for each track and layer and the depth, width and length of the melt pool were evaluated, and the observed values for each variable were analyzed. The average melt pool length, width, and depth were determined to have relative errors of 1.88%, 1.49%, and 2.12%, respectively, between the FEM model and experimentally measured dimensions for an optimal range of varied process parameters.

Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter and denudation zones

Dynamics of pore formation during laser powder bed fusion additive manufacturing

Understanding Melt Pool Behavior of 316L Stainless Steel in Laser Powder Bed Fusion Additive Manufacturing

In-situ Characterization and Quantification of Melt Pool Variation under Constant Input Energy Density in Laser Powder Bed Fusion Additive Manufacturing Process

Part geometry and conduction-based laser power control for powder bed fusion additive manufacturing

Determining the laser absorptivity of Ti-6Al-4V during laser powder bed fusion by calibrated melt pool simulation

Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges

Laser Melting Modes in Metal Powder Bed Fusion Additive Manufacturing

Experimental Quantification of Inward Marangoni Convection and Its Impact on Keyhole Threshold in Laser Powder Bed Fusion of Stainless Steel

Resolving thermal gradients and solidification velocities during laser melting of a refractory alloy

A Novel Required Laser Energy Predicting Model for Laser Powder Bed Fusion

The influence of laser characteristics on internal flow behaviour in laser melting of metallic substrates

Global local modeling of melt pool dynamics and bead formation in laser bed powder fusion additive manufacturing using a multi-physics thermo-fluid simulation

Numerical and Experimental Characterization of Melt Pool in Laser Powder Bed Fusion of SS316l

Effect of laser focal point position on porosity and melt pool geometry in laser powder bed fusion additive manufacturing

Computational Study of Transport Phenomena in Laser Melting-Based Metal Additive Manufacturing

Laser-metal interaction dynamics during additive manufacturing resolved by detection of thermally-induced electron emission

On thermal properties of metallic powder in laser powder bed fusion additive manufacturing

The Thermo-Mechanical Coupling Effect in Selective Laser Melting of Aluminum Alloy Powder