Abstract:The interactions of femtosecond lasers with gold targets were investigated with a numerical method combining molecular dynamics (MD) and the two-temperature model (TTM). Previous works using MD-TTM method did not consider all the thermodynamic parameters and the interatomic potential dependent of the electron temperature simultaneously. Therefore, we developed a LAMMPS function to achieve this. To accurately capture the physics behind the interactions, we also included the electron blast force from free electron pressure and the modified Fourier law with steep electron temperature gradient in our model. For bulk materials, a stress non-reflecting and heat conducting boundary is added between the atomistic and the continuum parts. The modified boundary force in our study greatly reduces the reflectivity of the atomistic-continuum boundary compared with its original form. Our model is the first to consider all these factors simultaneously and manage to predict four femtosecond laser ablation phenomena observed in the experiments. In this dissertation, the thermodynamic parameters in the two-temperature model were extensively explored. We considered three different approaches to calculate these parameters: namely interpolation, ab initio calculation, and analytical expression. We found that simple interpolation between solid state and plasma state could lead to high level of inaccuracy, especially for electron thermal conductivity. Therefore, ab initio calculation and analytical expression were used for the calculation of the thermodynamic parameters in more advanced studies. The effects of electron thermal conductivity and electron-phonon coupling factor on electron and lattice temperatures were analyzed.Our studies considered electron temperature dependent (ETD) and electron temperature independent (ETI) interatomic potentials. The ETI interatomic potential is easier to implement and therefore it is used in our phase change study to investigate the effects of target thickness on melting. Homogeneous melting occurred for thin films, while melting can be observed through the movement of the solid-liquid interface in thick or bulk materials. However, the ETI potential overestimated the bond strength at high temperatures. Therefore, ablation process was studied with the ETD potential. Three ablation mechanisms were found in our simulations at different laser fluences. Short nonthermal ablation was only observed at the ablation threshold. With increasing laser fluence, spallation was then seen. In high laser fluence regime, phase explosion occurred on the surface and coexisted with spallation.Lastly, we researched on the effects of the delay time between two femtosecond laser pulses. Various delay times did not have much influence on melting depth. In low laser fluence regime, with increasing delay time, the target went through nonthermal ablation, to spallation and to no ablation. In high laser fluence regime, longer delay time encouraged phase explosion while suppressed spallation.

Numerical simulation and experimental study of femtosecond laser ablation of copper: A two-temperature model with temperature-dependent properties and multiple phase transitions

Study of Ultrashort Laser Ablation of Metals by Molecular Dynamics Simulation and Experimental Method

Numerical simulation study of ultraviolet nanosecond laser ablation of Cu-Al2O3 dispersion strengthened alloys

Multiphysics modeling of femtosecond laser-copper interaction: from electron dynamics to plasma eruption

Towards obtaining high-quality surfaces with nanometric finish by femtosecond laser ablation: A case study on coppers

Numerical simulation of copper ablation by ultrashort laser pulses

Accurate Two-Dimensional Simulation Model and Experimental Demonstration in Ultraviolet Picosecond Laser Scribing Ablation

Two-temperature molecular dynamics simulation study of copper thin film irradiation with femtosecond and picosecond laser pulses

Molecular-dynamics study of multi-pulsed ultrafast laser interaction with copper

Effect of optical properties on the thermal responses of copper films induced by ultrafast lasers

PHASE CHANGE AND ABLATION STUDY OF METALS BY FEMTOSECOND LASER IRRADIATION USING HYBRID TTM/MD SIMULATIONS

Theoretical and Experimental Study of Energy Transportation and Accumulation in Femtosecond Laser Ablation on Metals

Molecular Dynamics Simulation of Femtosecond Laser Ablation of Cu50Zr50 Metallic Glass Based on Two-Temperature Model

Molecular Dynamics Simulation on Femtosecond Laser Ablation of Metal

Numerical Study on the Terminating Mechanisms of Copper Vapor Laser Pulse

Study of Femtosecond Ablation on Aluminum Film with 3D Two-Temperature Model and Experimental Verifications

Temporal-Spatial Measurement of Surface Morphological Evolution Time in Nanosecond Laser Irradiation on the Copper Film

Efficient modeling of metal ablation irradiated by femtosecond laser via simplified two-temperature model coupling molecular dynamics

A critical review on the simulation of ultra-short pulse laser-metal interactions based on a two-temperature model (TTM)

Study on Ultra-Short Laser Pulse Ablation of Metals by Molecular Dynamics Simulation

An improved three-dimensional two-temperature model for multi-pulse femtosecond laser ablation of aluminum