Abstract:<p>The laser direct deposition, one kind of additive manufacturing technologies, was used to produce W‒Cu composite material. To explain the formation of the deposited microstructure, the process of laser-powder interaction and particle transport phenomena during laser direct deposition were investigated through experiment and simulation works. The parameters of the coaxial powder flow (the distribution and the velocity of flying particles) and the particle motion on the melt pool were demonstrated with high-speed imaging. By using these parameters, a laser-powder flow interaction model was established to calculate the laser intensity attenuated by the powder flow and the temperatures of W and Cu particles. Based on the calculated results, a three-phase fluid dynamics model was constructed to simulate the transport phenomena of W and Cu particles on the substrate surface during laser deposition. The calculated results indicate that the temperatures of W and Cu particles were mainly in the solid state but with huge difference in temperature while arriving at the deposition area. The captured images show that these solid particles can be deposited until the substrate surface was slightly melted. The simulation results suggest that the heat of W particles is conducted to Cu particles rapidly after being deposited on the substrate surface. Coupled with the laser irradiation, Cu particles are melted and form a melt pool. Subsequently, a fallen W particle can float on the melt pool since the inertial force of the falling W particle and the surface tension between Cu and W are roughly balanced. In comparison, if a Cu particle falls on a floating W particle, the Cu particle will be melted and then flow into the melt pool in 300 μs. The combination of high-speed imaging and our simulation explained the deposited microstructure, i.e., the distribution of W particles in the deposition layer.</p>

Laser shock dynamic compaction of aluminum–copper (Al–Cu) composite metal powder

Effect of laser shock on the compacting characteristics and rebound behavior of composite powders (Al2O3/Al) with different alumina contents

Effect of Aluminium Content and Processing Parameters on the Microstructure and Mechanical Properties of Laser Powder-Bed Fused Magnesium-Aluminium (0, 3, 6, 9wt%) Powder Mixture

Dynamic Compaction Behaviors of Copper Powders Using Multi-Particle Finite Element Method

Composition design method of Al-Cu alloy for laser powder bed fusion

Characterization of laser-powder interaction and particle transport phenomena during laser direct deposition of W‒Cu composite

Effect of Copper-To-Aluminum Laser Welding Parameters on the Weld Formation and Microstructure Characteristics

Effect of different pulse shapes on the laser welding of aluminum and copper

Effect of Powder Spreading Parameters on Laser Absorption Behavior and Processability of High‐Strength Aluminum Alloy Fabricated by Laser Powder Bed Fusion

Effect of Laser Energy Density on Microstructure and Properties of High Strength and Magnetic Cu-Fe-P Immiscible Alloys Fabricated by Laser Selective Melting

Laser pressure welding of dissimilar aluminium and copper: microstructure and mechanical property

High Reflectivity and Thermal Conductivity Ag–Cu Multi-Material Structures Fabricated via Laser Powder Bed Fusion: Formation Mechanisms, Interfacial Characteristics, and Molten Pool Behavior

Mechanical Properties and Interfacial Characterization of Additive-Manufactured CuZrCr/CoCrMo Multi-Metals Fabricated by Powder Bed Fusion Using Pulsed Wave Laser

Laser Shock Peening of SiCp/2009Al Composites: Microstructural Evolution, Residual Stress and Fatigue Behavior

Study on Cu-Al2O3 metal-matrix composite coating prepared by Laser-assisted electrodeposition

Influence of Mo micro-particles on crack formation, microstructure, and mechanical behaviour of laser powder bed fusion fabricated CuZrAl bulk metallic glass composites

Microstructure and Properties of 7075/al2o3 Composite Coatings Prepared by Supersonic Laser Deposition

The Physical-Mechanical Properties of Aluminum Nanocomposites Produced by High Energy Explosion Impact

Research on the Laser Welding Process and Performance Analysis of SiCp/Al Composite and 2A14 Aluminum Alloy Dissimilar Metals

Laser sintering mechanism and shear performance of Cu–Ag–Cu joints with mixed bimodal size Ag nanoparticles

Effect of laser welding strategy for reducing intermetallic compound formation and residual stress