Abstract:Thanks to the need for refinement in the mold field, high-precision laser powder bed fusion (HP-LPBF) has become a critical technique for manufacturing new high-precision molds. The influence of HP-LPBF process parameters for densification of 18Ni300 maraging steel (MS18Ni300), as well as the related optical micrograph (OM), microstructure, phase composition, and mechanical properties of optimal relative density specimens, were comprehensively examined in this study. The sequence of HP-LPBF process parameters on the relative density of the specimens was investigated using the orthogonal experimental method. With a relative density of 99.18 ± 0.11 % and a surface roughness of 3.59 ± 0.32 μm, the optimal process parameters was attained. The influence of adding SiC on the specimens' OM, microstructure, phase composition, and mechanical properties were compared and studied. The results show that the building direction (BD) is the dominant heat flow direction in HP-LPBF by EBSD analysis and that the rotating 67° scanning strategy can effectively improve the isotropy of the mechanical properties of HP-LPBF parts. The MS18Ni300 specimen has a particularly thin cellular microstructures with a diameter of 6.11 μm. In addition, the dominant phase composition of the MS18Ni300 specimen was martensite (α). The microstructure of SiC (volume fraction of 1 %)/MS18Ni300 (M1) composites was significantly refined, and changes in the microstructure were primarily due to SiC's physical properties. The addition of SiC particles leads to a weakening of the preferred crystallographic orientation of the grains. The average grain size was 3.21 μm. No new phases were produced, but the mechanical properties were improved. The ultimate tensile strength and hardness of M1 were 1.33 GPa and 390.2 HV, respectively. The strengthening mechanism of SiC was discussed.

Mesoscopic simulation of surface morphology and thermodynamic mechanism during laser powder-bed fusing Ni-based composite: Underlying role of WC weight fraction

The dynamics of reinforced particle migration in laser powder bed fusion of Ni-based composite

Modeling and numerical studies of high-precision laser powder bed fusion

Modeling of rapid solidification in Laser Powder Bed Fusion processes

Integrating Phase Field Modeling and Machine Learning to Develop Process-Microstructure Relationships in Laser Powder Bed Fusion of IN718

The Effect of Solution Aging on the Microstructure and Mechanical Properties of a Laser Powder Bed Fusion-Formed WC-Reinforced 18Ni300 Composite

Effect of ingredients proportions on mechanical properties in laser-coated WC-blend welds

Laser powder bed fusion of cemented carbides by developing a new type of Co coated WC composite powder

On the role of energy input in the surface morphology and microstructure during selective laser melting of Inconel 718 alloy

Numerical studies of melt pool and gas bubble dynamics in laser powder bed fusion process

Novel WC-reinforced iron-based composites with excellent mechanical properties synthesized by laser additive manufacturing: Underlying role of reinforcement weight fraction

Formation mechanism of pore defects and surface ripples under different process parameters via laser powder bed fusion by numerical simulation and experimental verification

Particle-scale computational fluid dynamics study on surface morphology of GH4169 superalloy during multi-laser powder bed fusion with low energy density

High-precision laser powder bed fusion of 18Ni300 maraging steel and its SiC reinforcement composite materials

Influence of ultrasonic assistance on the microstructure and friction properties of laser cladded Ni60/WC composite coatings

Understanding of process and material behaviours in additive manufacturing of Invar36/Cu10Sn multiple material components via laser-based powder bed fusion

Microstructure and mechanical properties of WC-12Co cemented carbide fabricated by laser powder bed fusion on a WC-20Co cemented carbide substrate

Achieving high strength and high ductility in WC-reinforced iron-based composites by laser additive manufacturing

Solidification Behavior of WC Particles Reinforced Nickel Alloy Cladding Layers by Plasma Surfacing: Simulation and Experiment

Overlap ratio and scanning strategy effects on laser powder bed fusion Ti6Al4V: numerical thermal modeling and experiments

Multi-objective Optimization of Laser Welds with Mixed WC/Co/Ni Experiments Using Simplex-centroid Design