Abstract:The development of electronic devices towards miniaturization and integration has put forward higher requirements for polymer-based composites with high thermal conductivity (TC). Aluminum nitride (AlN) is one of the most promising fillers thanks to its high TC (∼320 W m−1 K−1) and outstanding physicochemical properties. However, the traditional composites filled with randomly dispersed AlN particles generally require extremely high filling fraction to enhance the TC, leading to increased production cost and degraded mechanical performance. To address this issue, an innovative strategy combining freezing casting and in-situ reaction process was proposed to directly construct vertically aligned AlN skeletons, which was further used as reinforcements to enhance the TC of epoxy (EP) composites. The close arrangement of AlN particles along the vertical direction was not only beneficial for enhancing the TC, but also improving the mechanical strength. The AlN/EP composites achieved an extremely high TC of ∼8.25 W m−1 K−1 at the AlN filling fraction of 56.2 vol%, which was 45.83 times higher than that of pure EP. The actual thermal management applications and finite element simulations also demonstrated the oriented AlN skeletons exhibited a more significant TC enhancement than that of randomly arranged AlN. Furthermore, the as-prepared AlN/EP composites also exhibited superior thermal stability and dielectric properties, presenting a broad application prospect as thermal management materials for the next-generation electronic devices.

Carbothermal Synthesis of Spherical AlN Fillers

Carbothermal Synthesis of Micro-Scale Spherical Aln Granules with Caf2 Additive

Carbothermal Synthesis of Spherical AlN Granules: Effects of Synthesis Parameters and Y2O3 Additive

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

Preparation of Spherical AlN Granules Directly by Carbothermal Reduction–Nitridation Method

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

Facile synthesis of monodisperse aluminum nitride microspheres

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Synthesis of Ultrafine AlN Powders in an Al-OC-N System

Synthesis of Aluminum Nitride Powders from A Plasma-Assisted Ball Milled Precursor Through Carbothermal Reaction

Construction of AlN oriented skeletons using in-situ reaction strategy and their enhancement effect on the thermal conductivity of epoxy composites

AlN Nanoparticles Prepared Through a Gelation-Polymerization Process

Promoting Effect of Silicon Particles on Gas-Diffusion-reaction System: In-situ Synthesis of AlN in Al-Si Materials

AlN Powder Synthesis by Sodium Fluoride-Assisted Carbothermal Combustion

Synthesis of Aln Porous-Shell Hollow Spheres by A Combustion Route

Microstructure and thermal conductivity of AlN ceramics with ultra-fine Y2O3 powder addition

Effect of AlN nanoparticle doping on thermophysical properties of nitrate via mechanical milling: Experimental studies and microscopic mechanisms

Microstructure of low-temperature sintered AlN

Synthesis of aluminum nitride fibres from aluminum silicate fibres by carbothermal reduction method

AlN ceramics synthesized by carbothermal reduction of mechanical activated Al2O3

Precisely Controlled Carbothermal Synthesis of Spherical Β-Si3n4 Granules