Abstract:With the development of integrated circuit towards the characteristics of the low-power consumption, miniaturization and high integration, three-dimensional integration technology based on Through-Silicon Via (TSV) comes into being. However, the thermal accumulation caused by the maximum stack density and the thermal stress caused by the mismatched thermal expansion coefficient between TSV surrounding materials will lead to the reliability problems such as circuit function failure and device performance drift. In this paper, the heat dissipation performance and thermal-mechanical reliability of TSV array in 2.5D silicon interposer were studied when the operation temperature is increased from 20°C to 100°C. Firstly, the influences of the geometrical parameters, such as the through hole radius, depth to width ratio, insulation thickness and TSV spacing, on thermal-mechanical reliability were analyzed for single TSV, paired TSV and 3*3 TSV array structures. Secondly, a configuration of TSV regular hexagonal array in silicon interposer is proposed to improve its heat dissipation performance.Our simulation results disclose that the stress is mainly concentrated at the junction where SiO2 layer deviates to copper and silicon substrate deviates to SiO2, which indicates the SiO2 layer is most prone to fracture. The through hole radius should be designed as small as possible to reduce the thermal stress, and a thicker SiO2 insulation layer thickness will induce the better thermal-mechanical stability of TSV. The optimized TSV's depth to width ratio should be set above 5 with the simultaneous consideration of the stress for silicon substrate, insulating layer, filled copper. For multiple TSVs, the spacing should be greater than twice the diameter to eliminate the influence of thermal stress between TSVs. In addition, in the case of the same spacing, the equivalent unit temperature of TSV regular hexagonal array distribution is 2.9°C lower than that of conventional matrix array distribution. The analysis and design of TSV array in 2.5D silicon interposer is promising to offer guideline to the future advanced package development.

Modeling of the RF Coaxial TSV Configuration Inside the Silicon Interposer with Embedded Cooling Cavity

Frequency- and temperature-dependent modeling of coaxial through-silicon vias for 3-D ICs

Transmission Characteristics Of A Coaxial Through-Silicon Via (C-Tsv) Interconnect

Electrothermal modeling of coaxial through silicon via (TSV) for three-dimensional ICs

Modeling of a Pair of Annular Through Silicon Vias (TSV)

Electrothermal modelling of through silicon via (TSV) interconnects

Electrothermal modelling and characterisation of submicron through-silicon carbon nanotube bundle vias for three-dimensional ICs

On the Efficacy of Through-Silicon-Via Inductors

Multi-physical field coupling effect in micro pin-fin channel cooling with coaxial-like through-silicon via (TSV) for three-dimensional integrated chip (3D-IC)

Double-Shielded Interposer with Highly Doped Layers for High-Speed Signal Propagation

Investigation of an Embedded Cooling RF Silicon Interposer for an Ultrahigh Heat Flux GaN TR Array

Coaxial Through-Silicon-Vias Using Low-κ SiO2 Insulator

A Rigorous Model for Through-Silicon Vias with Ohmic Contact in Silicon Interposer

Electrical–Thermal Cosimulation of Coaxial TSVs with Temperature-Dependent MOS Effect Using Equivalent Circuit Models

A RF Redundant TSV Interconnection for High Resistance Si Interposer

Thermal-Mechanical Analysis of TSV Array in 2.5D Silicon Interposer

Analysis of Multiple Vias Coupling in Silicon Interposer by Using Cylindrical Mode Expansion Method

Fabrication and RF Property Evaluation of High-Resistivity Si Interposer for 2.5-D/3-D Heterogeneous Integration of RF Devices

Electrical Characterization of RF TSV for 3D Multi-Core and Heterogeneous ICs

Modeling and Measurement of A Novel Shielding Design in Silicon Interposer

Thermal and Electrical Characterization of TSV Interposer Embedded with Microchannel for 2.5D Integration of GaN RF Devices