Abstract:In order to achieve well-performing chemical strengthening behavior, the composition of 86.12(xSiO(2)-yAl(2)O(3)-zP(2)O(5))- 9.95Na(2)O- 1.27ZnO- 2.66Li(2)O (x = 55-85wt%, y = 10-40wt% and z = 5-35wt%) were prepared by conventional melt-quenching technique. The glass forming region was obtained. Two compositional series of 65SiO(2)-yAl(2)O(3)-zP(2)O(5) (15 <= y <= 30, 5 <= z <= 30, 5 <= z <= 20) (Series I) and xSiO(2)-20%Al2O3-zP(2)O(5) (60 <= x <= 75, 5 <= z <= 20) (Series II) have been investigated. The relationship between glass structure and composition was investigated. The results show that the transparent and homogeneous glass is formed when the glass former P2O5 is lower than or equal to 15 wt% roughly. The P2O5 substitution for Al2O3 accelerates the depolymerization of aluminosilicate network. Phosphorus acts as network formers in the form of P-1 and P-2 units. In the case of the P2O5 substitution for SiO2, the roles of phosphorus in the glass network include P-0, P-1, P-2 and P-3 units. Furthermore, the Series I and Series II glass samples were chemical strengthened. The ion-exchange depth and the elastic modulus before and after chemical strengthening were studied. The results reveal that the ion exchange depth and elasticity modulus after chemical strengthening is maximum at 64 mu m and 80.5 GPa for x/z = 5.4 sample, respectively. The addition of phosphorus accelerates ion exchange, which is mainly attributed to the formation of ion channels. The number of P-n and the coordination number of phosphorus are the main factors effecting the ion channels.

Wetting Behavior of SnO-ZnO-P2O5-SiO2 Glass on 60 Vol.% SiCp/Al Composites and Characterization of the Interfacial Phases

Joining High Volume Fraction SiC Particle Reinforced Aluminum Matrix Composites (sicp/al) by Low Melting Point Stannous Oxide–zinc Oxide–phosphorus Pentoxide Glass

The Role of Phosphate in the Glass Forming Region, Structure and Mechanical Properties for the SiO2-Al2O3-P2O5 System Contains High-Aluminum

Wetting of silica and 304 stainless steel by SnO-P2O5-ZnO glass at 500–600 °C

Process and Properties of Brazing High Volume SiCp/6063Al Composites with Glass

Different Microstructure BaO–B2O3–SiO2 Glass/ceramic Composites Depending on High-Temperature Wetting Affinity

Investigation of Thermal Properties of Zr-Based Metallic Glass–Polymer Composite with the Addition of Silane

The Formation Mechanism of Pores and Unbonding in the Al2O3/Al2O3 Joints Brazed by 50bi2o3–35b2o3–15zno Glass

The Wettability of Y–Al–Si–O–N Oxynitride Glasses and Its Application in Silicon Nitride Joining

Characterisation of interfacial bonding in Al2O3 coated SiC whisker reinforced TZP composites

Behaviors of Oxide Film During Semisolid Brazing of SiCp/6063Al Composite Materials

Effect of Different Forms of Silica on Sintering, Microstructure and Properties of Borosilicate Glass/al2o3 Composites

Temperature Dependence of the Wettability Between Glass‐Forming Alloy Zr55Cu30Al10Ni5 and Polycrystalline ZrO2

Influence of silicon carbide nanowires on the properties of Bi-B-Si-Zn-Al glass based low temperature co-fired ceramics

Feasibility study of ZrSiO4 as matrix and fiber interphase of SiC/SiC composite

PHASE TRANSITION AND PROPERTIES OF Li_2O - Al_2O_3 - SiO_2 SYSTEM GLASS- CERAMIC WITH PARTIAL REPLACEMENT OF Al_2O_3 BY ZnO

Low Temperature Sintering Densification and Properties of CaO-B2O3-SiO2-ZrO2 Glass/ca0.99cu0.01sio3 Composites for LTCC Application

Wetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC Ceramic

Characterization of Interface Between the Particles in NiNbZrTiPt Metallic Glassy Matrix Composite Containing SiC Fabricated by Spark Plasma Sintering

Microstructure and Fracture Behavior of SiO 2 Glass Ceramic and TC4 Alloy Joint Brazed with TiZrNiCu Alloy