Abstract:To expand the application of SiC/SiC joints under extreme conditions, Nano-Infiltration and Transient Eutectic (NITE) joining technology with AlN-Y 2 O 3 as a sintering additive was successfully developed. The rheological properties of the slurry and the microstructure evolution of the joints were systematically characterized by rheometer, SEM, EDS, EBSD, and TEM, respectively. Both room-temperature and high-temperature flexural strength was measured to evaluate the mechanical properties of the joints. An immersion test with concentrated nitric acids was performed to evaluate the corrosion resistance of the joints. The defect-free joining layer was composed of a dense α-SiC phase, a small amount of YAG(Y 3 Al 5 O 12 ) distributed in the triangular grain boundary, and a Y-Al-O glass phase from AlN-Y 2 O 3 . The mechanism of NITE joining could be attributed to the incoherent growth of the newly generated α-SiC in the joining layer along the α-SiC substrate. The maximum room-temperature strength of the joints was 320.5 ± 37.6 MPa. When the test temperatures were 1000 °C, 1200 °C, and 1400 °C, the flexural strength reached 238.7 ± 33.1 MPa, 215.5 ± 52.5 MPa, and 166.9 ± 52.0 MPa, respectively. After immersing the joints in a concentrated HNO 3 for 168 h, the flexural strength was 173.3 ± 12.6 MPa. The joints' excellent mechanical properties and corrosion resistance reveal great application potential under extreme conditions.

The Wettability of Y–Al–Si–O–N Oxynitride Glasses and Its Application in Silicon Nitride Joining

The wettability of Y–Al–Si–O–N oxynitride glasses and its application in silicon nitride joining

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE–Si–Al–O–N (RE = Y or Yb) Glasses

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE-Si-Al-O-N (RE = Y or Yb) Glasses

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Nano-infiltration and transient eutectic (NITE) joining of SiC ceramics applied for the harsh environments

Sintering Behavior, Microstructure and Mechanical Properties of Various Fluorine-Containing Y-SiAlON Glass-Ceramics

Joining MgAl2O4 ceramics using ZnO–Al2O3–SiO2 glass ceramic with precipitated ZnAl2O4

Joining AlN ceramics by ZnO–Al2O3–B2O3–SiO2 (ZABS) glass-ceramic at low temperature

Joining of SiC ceramics by combining NITE-SiC interlayer and its thickness control

Study on Tungsten Metallization and Interfacial Bonding of Silicon Nitride High-Temperature Co-Fired Ceramic Substrates

Joining high volume fraction SiC particle reinforced aluminum matrix composites using Bi2O3-B2O3-ZnO-BaO-Na2O glass

Microstructure, mechanical and optical properties of MgAl2O4/MgAl2O4 joints bonded using CaO-Al2O3-SiO2 glass filler

Pressure-less joining of SiCf/SiC composites by Y2O3–Al2O3–SiO2 glass: Microstructure and properties

Joining of SiC ceramics using CaO-Al2O3-SiO2 (CAS) glass ceramics

Low-temperature joining of SiC ceramics by NITE phase using CaO-Al2O3-MgO-SiO2 glass as an additive combined with surface oxidation

Enhanced bonding strength of Al2O3/AlN ceramics joined via glass frit with gradient thermal expansion coefficient

Low Temperature Sintering and Performance of Aluminum Nitride/Borosilicate Glass

Joining of sintered SiC ceramics at a lower temperature using borosilicate glass with laser cladding Si modification layer

Heat-resistant Joints of Si3N4 Ceramics with Intermetallic Compounds Formed in Situ

Study on the mechanism of glass-SiC-glass anodic bonding process