Abstract:A new method is described to measure the in situ residual stress state in a thin fixed-fixed beam structure used in microelectromechanical systems (MEMS). The methodology can be applied to devices at the anticipated operational and environmental temperatures. The new technique makes use of differences in the thermal expansion coefficient between the thin beam and the substrate. The residual stress distribution is determined by matching the thermal deflections from a finite element model (FEM) to measured deflections of the beam. All previous residual stress measurement methods for MEMS suspended structures reported a uniformly distributed residual stress. Experimental data coupled with the new analytical method suggests that this may not be adequate for the case of a suspended thin structure with nonplanar surface topology. A stress gradient through the thickness must be included in the determination of the stress state of the beam. The new method indicates a spatially varying residual stress distribution and is capable of de-coupling the mean stress and the stress gradient through the thickness. It was found through an extensive literature review that the quantification of the stress gradient in a thin suspended structure has never been reported. The de-coupling makes the prediction of the stress state at different temperature points possible. Details of the new method are demonstrated and discussed by the use of a capacitive radio frequency (RF) MEMS switch.$\hfill{\hbox{[633]}}$

A Novel Symmetric Test Structure For Residual Stress On Mems Thin Film

A Novel Residual Stress Test Structure for MEMs Thin Films

A Novel Approach to Study Patterned Thin Film Local Stress for Microelectronics Application

A Novel Microstructure for In-Situ Measurement of Residual Stress in Micromechanical Thin Films

A new in situ residual stress measurement method for a MEMS thin fixed-fixed beam structure

A Highly Sensitive Local Curvature Metrology for Internal Stress Detection in Thin Films

Evaluating Interface Effect On Stresses In Thin Films By A Local Curvature Metrology With High Accuracy And Resolution

Measurement of Residual Stress of MEMS Materials

Simulation and Design on Test Structure for Residual Stress Based on GaAs MMIC Technology

Study of Local Stress Using Stress-Absorbing Si Diaphragm

Ultra-sensitive, Highly Reproducible Film Stress Characterization Using Flexible Suspended Thin Silicon Plates and Local Curvature Measurements

Residual Stress Measurement on a MEMS Structure With High-Spatial Resolution

Design of a Test Structure Based on Chevron-Shaped Thermal Actuator for In-Situ Measurement of the Fracture Strength of MEMS Thin Films

Raman Quantitate Stress in Nano-Thin Film of MEMS

Modification of curvature-based thin-film residual stress measurement for MEMS applications

Residual Stress Measurement in Thin Films Using a Slitting Method with Geometric Phase Analysis under a Dual Beam (FIB/SEM) System

Overview of residual stress in MEMS structures: Its origin, measurement, and control

RESIDUAL STRESSES IN MICRO-ELECTRO-MECHANICAL SYSTEMS

A Novel Micro Tensile Testing Instrument with Replaceable Testing Specimen by Parylene Passivation Technique

In Situ Test Structures for the Thermal Expansion Coefficient and Residual Stress of Polysilicon Thin Films

Residual stress–driven test technique for freestanding ultrathin films: Elastic behavior and residual strain