Abstract:Current methodologies used for the inference of thin film stress through curvature measurements are strictly restricted to stress and curvature states which are assumed to remain uniform over the entire film/substrate system. Recently Huang, Rosakis and co-workers [Huang, Y., Ngo, D., Rosakis, A.J., 2005. Non-uniform, axisymmetric misfit strain: in thin films bonded on plate substrates/substrate systems: the relation between non-uniform film stresses and system curvatures. Acta Mech. Sin. 21, 362–370; Huang, Y., Rosakis A.J., 2005. Extension of Stoney’s Formula to non-uniform temperature distributions in thin film/substrate systems. The case of radial symmetry. J. Mech. Phys. Solids 53, 2483–2500; Ngo, D., Huang, Y., Rosakis, A. J., Feng, X. 2006. Spatially non-uniform, isotropic misfit strain in thin films bonded on plate substrates: the relation between non-uniform film stresses and system curvatures. Thin Solid Films (in press)] established methods for film/substrate system subject to non-uniform misfit strain and temperature changes. The film stresses were found to depend non-locally on system curvatures (i.e., depend on the full-field curvatures). The existing methods, however, all assume uniform film thickness which is often violated in the thin film/substrate system. We extend these methods to arbitrarily non-uniform film thickness for the thin film/substrate system subject to non-uniform misfit strain. Remarkably the stress-curvature relation for uniform film thickness still holds if the film thickness is replaced by its local value at the point where the stress is evaluated. This result has been experimentally validated in Part II of this paper.

Modification of curvature-based thin-film residual stress measurement for MEMS applications

A new method for high resolution curvature measurement applied to stress monitoring in thin films

Measurement Of Residual Stress In Multilayered Thin Films By A Full-Field Optical Method

Ultra-sensitive, Highly Reproducible Film Stress Characterization Using Flexible Suspended Thin Silicon Plates and Local Curvature Measurements

A Highly Sensitive Local Curvature Metrology for Internal Stress Detection in Thin Films

Extension of the Stoney formula for film–substrate systems with gradient stress for MEMS applications

Evaluating Interface Effect On Stresses In Thin Films By A Local Curvature Metrology With High Accuracy And Resolution

A Theoretical Analysis for Arbitrary Residual Stress of Thin Film/Substrate System WithNonnegligible Film Thickness

Measuring stiffness and residual stress of thin films by contact resonance atomic force microscopy

Thin film/substrate systems featuring arbitrary film thickness and misfit strain distributions. Part II: Experimental validation of the non-local stress/curvature relations

Study of Local Stress Using Stress-Absorbing Si Diaphragm

Multilayer Thin Films/substrate System with Variable Film Thickness Subjected to Non-Uniform Misfit Strains

A Novel Approach to Study Patterned Thin Film Local Stress for Microelectronics Application

A new in situ residual stress measurement method for a MEMS thin fixed-fixed beam structure

Multi-layer thin films/substrate system subjected to non-uniform misfit strains

Thin Film/substrate Systems Featuring Arbitrary Film Thickness and Misfit Strain Distributions. Part I: Analysis for Obtaining Film Stress from Non-Local Curvature Information

Modeling and Characterization of Residual Stress Distribution of Thin Film/Substrate Structure with Non-negligible Film Thickness from Morphology

A Novel Residual Stress Test Structure for MEMs Thin Films

Thin film stress from nonspherical substrate bending measurements

The effect of thin film/substrate radii on the Stoney formula for thin film/substrate subjected to nonuniform axisymmetric misfit strain and temperature