Abstract:In this paper, we present CMOS compatible fabrication of monocrystalline silicon micromirror arrays using membrane transfer bonding. To fabricate the micromirrors, a thin monocrystalline silicon device layer is transferred from a standard silicon-on-insulator (SOI) wafer to a target wafer (e.g., a CMOS wafer) using low-temperature adhesive wafer bonding. In this way, very flat, uniform and low-stress micromirror membranes made of monocrystalline silicon can be directly fabricated on top of CMOS circuits. The mirror fabrication does not contain any bond alignment between the wafers, thus, the mirror dimensions and alignment accuracies are only limited by the photolithographic steps. Micromirror arrays with 4 × 4 pixels and a pitch size of $16\ \mu{\rm m}\times 16\ \mu{\rm m}$ have been fabricated. The monocrystalline silicon micromirrors are 0.34 $\mu{\rm m}$ thick and have feature sizes as small as 0.6 $\mu{\rm m}$. The distance between the addressing electrodes and the mirror membranes is 0.8 $\mu{\rm m}$. Torsional micromirror arrays are used as spatial light modulators, and have potential applications in projection display systems, pattern generators for maskless lithography systems, optical spectroscopy, and optical communication systems. In principle, the membrane transfer bonding technique can be applied for integration of CMOS circuits with any type of transducer that consists of membranes and that benefits from the use of high temperature annealed or monocrystalline materials. These types of devices include thermal infrared detectors, RF-MEMS devices, tuneable vertical cavity surface emitting lasers (VCSEL) and other optical transducers.$\hfill{\hbox{[917]}}$

A CMOS-MEMS M icromirror W ith Large Out-of-Plane Actuation

MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique

Realization of Three-Dimensionally MEMS Stacked Comb Structures for Microactuators Using Low-Temperature Multi-Wafer Bonding with Self-Alignment Techniques in CMOS-Compatible Processes

Hybrid Electrostatic Actuator for Micromirror Tilting

A Poly-Si-Based Vertical Comb-Drive Two-Axis Gimbaled Scanner for Optical Applications

Process Platform For High Aspect-Ratio Self-Aligned Vertical Comb Actuators

Design and investigation of dual-axis electrostatic driving MEMS scanning micromirror

Driving Principle and Stability Analysis of Vertical Comb-Drive Actuator for Scanning Micromirrors

Into-plane Rotating Micromirror Actuated by a Hybrid Electrostatic Driving Structure

A Novel Electrostatically Driven Micromirror with Lateral Comb Actuators and T-Shaped Torsion Bars

Design of Novel Sequential Engagement Vertical Comb Electrodes for Analog Micromirror

Novel MEMS Torsional Mirror Optical Switch

CMOS-MEMS Based Optical Electrostatic Phase Shifter Array With Low Driving Voltage and High Fill Factor

Design, Fabrication and Characterization of Novel Micromirror with Vertical Torsion Comb Driver

A Large Out-of-plane Motion Mechanism for Optical Applications

A novel quasi-static MEMS piezoelectric micromirror array with a high fill factor and three degrees of freedom

Design of an Electrostatic Silicon Torsion Micromirror for Low Drive Voltage and Wide Angle MEMS Optical Switch Applications

An Improved Electrostatically-Driven Micro Torsion Mirror Fabricated by Silicon Micromachining for Optical Switching Devices

Arrays of monocrystalline silicon micromirrors fabricated using CMOS compatible transfer bonding

Symmetry breaking and mechanical filter make a pseudo-gimbal-less two-dimensional MEMS scanning mirror with multiple scanning modes

Micro Torsion Mirror Actuated by Compound Electrostatic Driving Structure