Abstract:High temperature passivating contacts for c-Si based solar cells are intensively studied because of their potential in boosting solar cell efficiency while being compatible with industrial processes at high temperatures. In this work, the hydrogenation mechanism of fired passivating contacts (FPC) based on c-Si/SiOx/nc-SiCx(p) stacks was investigated. More specifically, the correlation between passivation and local re-distribution of hydrogen resulting from the application of different types of interfacial oxides (SiOx) and post-hydrogenation processes was analyzed. To do so, the applied processing sequence was interrupted at different stages in order to characterize the samples. To assess the hydrogen content, deuterium was introduced (alongside/instead of hydrogen) and secondary ion mass spectroscopy (SIMS) was used for depth profiling. Combining these results with lifetime measurements, the key role played by hydrogen in the passivation of defects at the c-Si/SiOx interface is discussed. The SIMS profiles show that hydrogen almost completely effuses out of the SiCx(p) during firing, but can be re-introduced by hydrogenation via forming gas anneal (FGA) or by release from a hydrogen containing layer such as SiNx:H. A pile-up of H at the c-Si/SiOx interface was observed and identified as a key element in the FPC's passivation mechanism. Moreover, the samples hydrogenated with SiNx:H exhibited higher H content compared to those treated by FGA, resulting in higher iVOC values. Further investigations revealed that the doping of the SiCx layer does not affect the amount of interfacial defects passivated by the hydrogenation process presented in this work. Eventually, an effect of the oxide's nature on passivation quality is evidenced. iVOC values of up to 706 mV and 720 mV were reached with FPC test structures using chemical and UV-O3 tunneling oxides, respectively, and up to 739 mV using a reference passivation sample featuring a ~25 nm thick thermal oxide.

Effective plasma hydrogen passivation of mc-Si solar cells after finishing contacts

Role of Hydrogen Plasma Pretreatment in Improving Passivation of the Silicon Surface for Solar Cells Applications

A Method to Slow Down the Etching of Hydrogen Plasma Pretreatment and Improve Passivation in Silicon Heterojunction Solar Cells

Investigation of positive roles of hydrogen plasma treatment for interface passivation based on silicon heterojunction solar cells

Dry Passivation Process for Silicon Heterojunction Solar Cells Using Hydrogen Plasma Treatment Followed by In Situ a-Si:H Deposition

Controllable A-Si:H/c-si Interface Passivation by Residual SiH4 Molecules in H-2 Plasma

Improving the Performance of Crystalline Si Solar Cell by High-Pressure Hydrogenation*

Effective Hydrogenation Strategies to Boost Efficiency over 20% for Crystalline Silicon Solar Cell with Al2O3/Cu2O Passivating Contact

Significant Improvement of Passivation Performance by Two-Step Preparation of Amorphous Silicon Passivation Layers in Silicon Heterojunction Solar Cells*

Improved Amorphous/crystalline Silicon Interface Passivation for Silicon Heterojunction Solar Cells by Hot-Wire Atomic Hydrogen During Doped A-Si:H Deposition

Analysis of hydrogen distribution and migration in fired passivating contacts (FPC)

Progress of hydrogenation engineering in crystalline silicon solar cells: a review

Chemically Active Plasmas for Surface Passivation of Si Photovoltaics

Silicon Homojunction Solar Cells Via a Hydrogen Plasma Etching Process

Role of Hydrogen in Modifying A-Si:H/c-si Interface Passivation and Band Alignment for Rear-Emitter Silicon Heterojunction Solar Cells

Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells

Passivation Improvement of Poly‐SiOx Based TOPCon Contacts by Thermal Annealing in a Water Vapor Atmosphere: Mechanism Exploration and Application Research

Enhancement of C-Si Surface Passivation Quality by Increasing in Situ H2 Flow Rate

Si Surface Passivation By Siox:H Films Deposited By A Low-Frequency Icp For Solar Cell Applications

Impact of Surface Treatments on the Passivation Effect for N-Type Crystalline Silicon in Heterojunction Solar Cells

Improving the Photovoltaic Performance of the All-Solid-state TiO2 NR/CuInS2 Solar Cell by Hydrogen Plasma Treatment