Abstract:We report the first demonstration of hydrogen treatment as a simple and effective strategy to fundamentally improve the performance of TiO(2) nanowires for photoelectrochemical (PEC) water splitting. Hydrogen-treated rutile TiO(2) (H:TiO(2)) nanowires were prepared by annealing the pristine TiO(2) nanowires in hydrogen atmosphere at various temperatures in a range of 200-550 °C. In comparison to pristine TiO(2) nanowires, H:TiO(2) samples show substantially enhanced photocurrent in the entire potential window. More importantly, H:TiO(2) samples have exceptionally low photocurrent saturation potentials of -0.6 V vs Ag/AgCl (0.4 V vs RHE), indicating very efficient charge separation and transportation. The optimized H:TiO(2) nanowire sample yields a photocurrent density of ∼1.97 mA/cm(2) at -0.6 V vs Ag/AgCl, in 1 M NaOH solution under the illumination of simulated solar light (100 mW/cm(2) from 150 W xenon lamp coupled with an AM 1.5G filter). This photocurrent density corresponds to a solar-to-hydrogen (STH) efficiency of ∼1.63%. After eliminating the discrepancy between the irradiance of the xenon lamp and solar light, by integrating the incident-photon-to-current-conversion efficiency (IPCE) spectrum of the H:TiO(2) nanowire sample with a standard AM 1.5G solar spectrum, the STH efficiency is calculated to be ∼1.1%, which is the best value for a TiO(2) photoanode. IPCE analyses confirm the photocurrent enhancement is mainly due to the improved photoactivity of TiO(2) in the UV region. Hydrogen treatment increases the donor density of TiO(2) nanowires by 3 orders of magnitudes, via creating a high density of oxygen vacancies that serve as electron donors. Similar enhancements in photocurrent were also observed in anatase H:TiO(2) nanotubes. The capability of making highly photoactive H:TiO(2) nanowires and nanotubes opens up new opportunities in various areas, including PEC water splitting, dye-sensitized solar cells, and photocatalysis.

Improving the Photovoltaic Performance of the All-Solid-state TiO2 NR/CuInS2 Solar Cell by Hydrogen Plasma Treatment

CuBi2O4/CuO Heterojunction Coated with Electrodeposited ZnO Overlayer for Stable Solar Hydrogen Evolution

Hydrogenated TiO2 Thin Film for Accelerating Electron Transport in Highly Efficient Planar Perovskite Solar Cells

Enhancement of Solar-to-hydrogen Conversion Efficiency in Water Splitting by Optimizing Morphology of Cu2O Nanostructure and Surface Modification

Advanced nanoporous TiO2 photocatalysts by hydrogen plasma for efficient solar-light photocatalytic application

Hydrogen-treated TiO2 nanowire arrays for photoelectrochemical water splitting

Enhancement in Solar Hydrogen Generation Efficiency Using InGaN Photoelectrode after Surface Roughening Treatment with Nano-Sized Ni Mask

Interface Connection Modulation by Heating Treatment for Photovoltaic Performance Enhancement on CuInS2 Quantum Dot Sensitized Solar Cells

Low-Energy Hydrogen Ions Enable Efficient Room-Temperature and Rapid Plasma Hydrogenation of TiO2 Nanorods for Enhanced Photoelectrochemical Activity

Improving on the Interparticle Connection for Performance Enhancement of Flexible Quantum Dot Sensitized Solar Cells

Improving the Performance of Crystalline Si Solar Cell by High-Pressure Hydrogenation*

Combined heterostructures between Bi2S3 nanosheets and H2-treated TiO2 nanorods for enhanced photoelectrochemical water splitting

Engineering the heterojunction between TiO2 and In2O3 for improving the solar-driven hydrogen production

Plasma-Wind-Assisted In2S3 Preparation with an Amorphous Surface Structure for Enhanced Photocatalytic Hydrogen Production

A Thin-Film Silicon Based Photocathode With A Hydrogen Doped Tio2 Protection Layer For Solar Hydrogen Evolution

Performance Optimization of P-I-n Type Microcrystalline Silicon Thin Films Solar Cells Deposited in Single Chamber

Construction of TiO2/SnIn4S8 Heterojunction to Promotion Photogenerated Carrier Separation and Enhance Photocatalytic Hydrogen Production Via Superoxide Radical Active Species

Enhancing Photocatalytic Activities for Sustainable Hydrogen Evolution on Structurally Matched CuInS2/ZnIn2S4 Heterojunctions

Construction of two-dimensional zinc indium sulfide/bismuth titanate nanoplate with S-scheme heterojunction for enhanced photocatalytic hydrogen evolution

Rational design of all-solid-state TiO2-x/Cu/ZnO Z-scheme heterojunction via ALD-assistance for enhanced photocatalytic activity

Photocatalytic hydrogen production enhancement of Z-Scheme CdS quantum dots/Ni2P/Black Ti3+–TiO2 nanotubes with dual-functional Ni2P nanosheets