Active and Stable Mxene Modified Cu2o Composite Films for Photoelectrochemical Water Splitting
Meltem Yilmaz,Albertus Denny Handoko,Babak Anasori,Zhi Wei Seh,Gregory Kia Liang Goh,Yury Gogotsi,Junwang Tang,Ivan P Parkin,Gopinathan Sankar
DOI: https://doi.org/10.1149/ma2020-01522904mtgabs
2020-01-01
ECS Meeting Abstracts
Abstract:Although limited in supplies and non-renewable, fossil fuels currently provide 80% of the global annual energy.1 Furthermore, the combustion of fossil fuels emits lingering gas emissions that exacerbates global warming. Unlike fossil fuels, the solar energy is abundant, globally accessible and renewable, therefore developing technologies which can efficiently and sustainably harness and utilise this energy source is imperative. Solar-driven water splitting has been one of the most studied reactions because its product (H2) is a clean energy source with 4-fold higher mass energy density than fossil based fuels like gasoline. However, achieving good solar to hydrogen conversion efficiency (STH) in a single device remains a big challenge. Cu2O is a very attractive photocathode material for the solar-driven water splitting as it has a narrow direct band gap of ca. 2 eV, which is capable to absorb most of the visible portion of the sunlight. It has favourable band positions for the hydrogen evolution reaction, with a theoretical 18% STH efficiency.2 However, one major drawback which limits the wider use of this material is its lack of stability in aqueous solutions when exposed to light. In this study, we aim to introduce MXene’s as a cocatalyst on to Cu2O films. MXene’s are a family of 2-dimensional transition metal carbides, nitrides and carbonitrides. They have good electronic conductivity, good chemical stability and abundant active sites,3 making them a suitable co-catalyst for solar-driven water splitting reactions. We observed a 3.7-fold increase in photocurrent density during photoelectrochemical (PEC) measurements at 0 V (vs. reversible hydrogen electrode) on MXene modified Cu2O compared to the plain Cu2O film. We also found that MXene addition, along with deposition of ZnO charge transfer layer, significantly improves the photo-stability of Cu2O photocathodes during simulated solar-driven water splitting reactions. We attribute this outcome mainly to the enhancement of the interfacial charge transfer and electrode photoconductivity upon illumination imparted by MXenes. References 1 World Energy Counc., 2013, 1–28. 2 A. Paracchino, V. Laporte, K. Sivula, M. Grätzel and E. Thimsen, Nat. Mater., 2011, 10, 456–461. 3 M. Naguib, M. Kurtoglu, V. Presser, J. Lu, J. Niu, M. Heon, L. Hultman, Y. Gogotsi and M. W. Barsoum, Adv. Mater., 2011, 23, 4248–4253.