Abstract:By adopting polymer/silica hybrid rib waveguide structure,a low power-consumption Mach-Zehnder interferometer(MZI) thermo-optic switch is designed and fabricated with techniques including chemical vapor deposition(CVD),spin-coating,wet-etching,etc.The wavelength dispersions of waveguide core,buffer and cladding materials are measured,and output power and output spectrum are theoretically analyzed.Switching response and spectrum characteristics are measured using a tunable laser as input source.Under 1 550 nm wavelength,the driving power of the switch is about 7.8 mW,the extinction ratio between ON state and OFF state is up to 32.6 dB,and under the function of pure square-wave switching signal(peak-to-peak amplitude of 3Vpp),the rising time and falling time are 107 μs and 71 μs,respectively.Keeping applying the driving power at 1 550 nm wavelength on the device,the measured spectrum width is about 50 nm(1 520-1 570 nm) with an extinction ratio over 18 dB.A noise-level-tunable driving source is developed with NE555 and other integrated circuits,and then the driving-noise-tolerance characteristics are investigated.Experimental results indicate that the allowed maximum noise-level is about 1.1 Vpp with a required extinction ratio larger than 10 dB.The proposed results in this paper are of good meanings for practical applications of such thermo-optic switches with the hybrid waveguide structure.

Polymeric Thermo-Optic Switch Based on Strip-Loaded Optical Waveguide

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

Fabrication of A Polymer-On-Silica Hybrid Thermo-Optic Switch with Fast Response Time and Low Power Consumption

Fast and Low-Power Thermo-Optic Switch Based on Organic-Inorganic Hybrid Strip-Loaded Waveguides.

Fast Response 2×2 Thermo-Optic Switch with Polymer/silica Hybrid Waveguide

Polymer Thermo-Optic Switches with Y-Branch

650-nm All-Polymer Thermo-Optic Waveguide Switch Arrays Based on Novel Organic–Inorganic Grafting PMMA Materials

Fast polymer thermo-optic switch with silica under-cladding

Embedded Waveguide Thermo-optic Switch Based on Novel Organic-inorganic Hybrid Material

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Fabrication and Characterization on an Organic/inorganic 2 × 2 Mach–Zehnder Interferometer Thermo-Optic Switch

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Polymeric Waveguide MZI Thermo-Optic Mode Switch Based on Asymmetric Directional Coupler

Optimized Design and Fabrication of Polymer/Silica Thermo-Optic Switch with Low Power Consumption

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

650-Nm 1 × 2 Polymeric Thermo-Optic Switch with Low Power Consumption.

Polymer M-Z Thermal Optical Switch at 532-Nm Based on Wet Etching and UV-Writing Waveguide.

850-Nm Polymeric Waveguide Thermo-Optic Switch with Low Power-Consumption

Response-time improvement of a 2×2 thermo-optic switch with polymer/silica hybrid waveguide

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform