Abstract:By adopting polymer/silica hybrid rib waveguide structure,a low power-consumption Mach-Zehnder interferometer(MZI) thermo-optic switch is designed and fabricated with techniques including chemical vapor deposition(CVD),spin-coating,wet-etching,etc.The wavelength dispersions of waveguide core,buffer and cladding materials are measured,and output power and output spectrum are theoretically analyzed.Switching response and spectrum characteristics are measured using a tunable laser as input source.Under 1 550 nm wavelength,the driving power of the switch is about 7.8 mW,the extinction ratio between ON state and OFF state is up to 32.6 dB,and under the function of pure square-wave switching signal(peak-to-peak amplitude of 3Vpp),the rising time and falling time are 107 μs and 71 μs,respectively.Keeping applying the driving power at 1 550 nm wavelength on the device,the measured spectrum width is about 50 nm(1 520-1 570 nm) with an extinction ratio over 18 dB.A noise-level-tunable driving source is developed with NE555 and other integrated circuits,and then the driving-noise-tolerance characteristics are investigated.Experimental results indicate that the allowed maximum noise-level is about 1.1 Vpp with a required extinction ratio larger than 10 dB.The proposed results in this paper are of good meanings for practical applications of such thermo-optic switches with the hybrid waveguide structure.

Low Power Consumption Thermo‐optic Switch Based on DR1/PMMA

Low-Power And High-Speed Thermo-Optic Switch Using Hybrid Silica/Polymer Waveguide Structure: Design, Fabrication And Measurement

Optimized Design and Fabrication of Polymer/Silica Thermo-Optic Switch with Low Power Consumption

Design and Fabrication of an Organic/inorganic Hybrid Thermo-Optic Switch with Low Power Consumption

High efficiency thermal optical switch based on suspended polymer waveguide

Fast and Low-Power Thermo-Optic Switch Based on Organic-Inorganic Hybrid Strip-Loaded Waveguides.

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

2 × 3 Thermo-optical Switch Utilizing Total Internal Reflection

Fabrication and Driving-Noise-tolerance Characteristics of Wide-Spectrum Polymer Thermo-Optic Switch

Thermooptic Switch Based on Photonic-Crystal Line-Defect Waveguides

Driving-NoiseTolerant Broadband Polymer/Silica Hybrid Thermo-Optic Switch with Low Power Consumption (vol 31, pg 299, 2012)

Nanosecond Response Electro‐optic Switch Based on High Cost‐effective Poled Polymeric Material

Low-power consumption silica-based 2 x 2 thermooptic switch using trenched silicon substrate

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Study of 1×2 total-internal-reflection thermo-optic polymeric switches

Polymer Thermo-Optic Switches with Y-Branch

Polyimide-waveguide-based Thermal Optical Switch Using Total-Internal-reflection Effect

A Novel 2 X 3 Optical Switch Utilizing Total Internal Reflection Based On Thermo-Optical Effect Of Polymer

Low electric power drived thermo-optic multimode interference switches with tapered heating electrodes

Compact Su8-Silica Hybrid Thermo-Optic Switch With Low Power Consumption

Low Crosstalk Y-branch 1×2 Thermo-Optic Digital Optical Switch